Overview
The Fishbone Offroad Bullhead Rear Bumper, part FISFB22079, is a powder-coated black steel rear bumper for the 1984–2001 Jeep Cherokee XJ. It is made from 3/16 inch steel and has an integrated 2-inch receiver for off-road use.
The bumper tucks up close to the back of the XJ, which Fishbone says gives a good departure angle when off-road. It comes with all the necessary mounting hardware, including nut strips to make the fit easier, and two D-rings for recovery.
Key features
- 3/16 inch steel, powder coated black
- Tucks up against the back of the XJ for departure angle
- Integrated 2-inch receiver for off-road use
- Two D-rings included
- Nut strips included to make installation easier
Choosing a rear bumper setup
A rear bumper carries the load of recovery and carry gear, so it works best when the mounts, receiver and body are all matched. A receiver is useful for accessories and recovery attachments, but its load limits depend on the receiver and the mounting points. Confirm those limits before attaching heavy loads or a winch.
Owners often add a tire carrier, recovery points or a spare tire mount, so check the bumper’s clearance with the rest of the setup before installing. Inspect the mounting bolts and the bumper’s welds after rough trail use, and retorque the hardware after the first few trips. Steel bumpers can pick up scratches and surface rust, so touch up bare spots when they appear.
- Check bolts and welds after trail use
- Confirm receiver use limits before towing
- Plan clearance for a spare or carrier
Specifications
| Brand | Fishbone Offroad |
|---|---|
| Part number | FISFB22079 |
| Finish | Powder coated black |
| Material | 3/16 inch steel |
| Position | Rear |
| Receiver | Integrated 2-inch receiver |
| D-rings | 2 included |
| Fitment | 1984–2001 Jeep Cherokee XJ |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee XJ.
The list covers the XJ only, so the Grand Cherokee ZJ and WJ and the later Liberty KJ are not on it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
All the necessary mounting hardware is included, so no separate mounts are needed. The nut strips are part of the kit.
What’s included
Rear bumper with integrated 2-inch receiver, mounting hardware, nut strips and two D-rings.
















