Overview
The Poison Spyder RockBrawler Rear Bumper with Shackle Tabs, part number PSC17-61-010-D, is a bare steel rear bumper for the 2007–2018 Jeep Wrangler (JK), in two-door and four-door models. It has a high clearance, multi-faceted design and is listed with D-ring mounts, without a receiver hitch or tire carrier.
The RockBrawler is built from CNC laser cut, brake formed 3/16-inch plate steel. Its bends and facets add strength and improve departure angles and corner obstacle clearance. It mounts without cutting or altering the Jeep’s frame rails, which sets it apart from the BFH rear bumper for the JK.
The bumper has recessed light buckets sized for 2-1/2-inch round clear LED backup lamps. The buckets protect the lamps from rocks and direct their light rearward instead of into the bumper interior. The lamps are not included.
The RockBrawler is designed to use the Jeep’s OE tow hitch, which is rated for towing and is easily removed. Owners who tow can keep it, and owners who want more trail clearance can take it off.
A built-in step and recess provide rear access and clearance for the spare tire. The bumper works with the stock spare tire carrier and a tire up to 35 inches. Heavy duty recovery shackle tabs are CNC machined from 1-inch steel billet and welded to the bumper for the brand’s 3/4-inch recovery shackles.
Key features
- High clearance, multi-faceted 3/16-inch steel design
- Mounts without cutting the frame rails
- Recessed buckets for 2-1/2-inch round LED backup lamps
- Built-in step and recess for rear access
- Heavy duty 1-inch billet recovery shackle tabs
Rear bumper setup for trail use
A rear bumper changes how the back of the Jeep approaches and leaves obstacles, so think about the rest of the rear end as a system. The bumper’s facets and bends add strength, and mounting without altering the frame rails makes it easier to remove later. Tire size matters too, because the spare tire carrier and tire clearance affect how the bumper sits under the rear overhang.
Recovery shackles are usually the most loaded part of a rear bumper, so inspect the welds at the shackle tabs and the bolts that hold the bumper on after hard use. Lighting and cable routing often get reworked at the same time, so plan the backup lamp wiring before the bumper goes on. Keep the finish clean and touch up bare steel to slow surface rust.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | PSC17-61-010-D |
| Position | Rear |
| Material | Steel, 3/16-inch plate |
| Finish | Bare |
| Receiver hitch included | No; the OE tow hitch can be kept |
| D-ring mounts included | Yes |
| Tire carrier included | No |
| Spare tire clearance | Up to 35 inches with the stock carrier |
Vehicle fitment
It is a direct fit for the 2007–2018 Jeep Wrangler (JK), in two-door and four-door models.
The list does not include the 2019 and later Wrangler (JL) or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eight Grade 8 bolts hold the bumper on three planes: a mounting flange bolt on each side and a row of bolts along the bottom that fastens into the rear crossmember. The bumper mounts without cutting the frame rails.
What’s included
The bumper includes the D-ring mounts and the shackle tabs. The factory OE tow hitch stays with the vehicle when it is kept.
Not included: the 2-1/2-inch LED backup lamps, a receiver hitch and a tire carrier.









