Overview
It is a stainless steel tubular rear bumper for the 1987–1995 Jeep Wrangler YJ, 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ. An optional frame-mounted receiver hitch is available for it, so confirm the hitch setup you need before ordering.
Rugged Ridge says its tube bumpers have smooth ground welds, which reduce small weld pockets that can rust, and welded end caps rather than plastic ones. The rear opening is 17 inches, which Rugged Ridge says allows tires up to 31 inch on the factory spare tire mount.
The rear opening is a design feature of Rugged Ridge rear bumpers. The optional frame-mounted hitch is meant for lightweight towing only, and hitch boxes built into other tube bumpers are generally not suited to towing.
Key features
- Stainless steel dual tube construction
- Smooth ground welds that Rugged Ridge says leave less room for rust
- Welded end caps instead of plastic end caps
- 17-inch rear opening for tires up to 31 inch on the factory spare mount
- Optional frame-mounted receiver hitch rated for 2,000 lb towing and 200 lb tongue weight
Stainless tube bumper care
Stainless steel tube bumpers hold up well to trail mud and rock contact, but they still need regular attention. Rinse off mud and salt after trips, and dry the tubes to keep dirt from sitting in the joints. Stainless resists rust better than painted steel, yet welds and fasteners can still collect grime that holds moisture against the metal.
Inspect the welds, end caps and mounting bolts after rough trail use. A loose bolt or a cracked weld near a mount is the first sign to address before the bumper shifts. If you add a hitch, plan to re-check the mounting hardware after the first few drives, since a hitch adds load at the frame.
- Rinse mud and salt after off-road trips
- Check welds and end caps for cracks
- Re-check bolts after the first drives with a hitch
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | RUG11573.03 |
| Position | Rear |
| Finish | Stainless steel |
| Rear opening | 17 inch |
| Maximum tire size on spare mount | 31 inch |
| Receiver hitch | Optional frame-mounted receiver hitch |
| Hitch towing capacity | 2,000 lb towing, 200 lb tongue weight |
| D-ring mounts | Not included |
| Tire carrier | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), the 1997–2006 Wrangler (TJ) and the 1987–1995 Wrangler (YJ).
The list does not include the Wrangler JK or JL, or the CJ models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The dual tube rear bumper. Confirm whether the optional frame-mounted receiver hitch is part of your order.
Not included: The tire carrier and D-ring mounts are not included.










