Bumpers and Grille Guards
Showing 1093–1104 of 1248 resultsSorted by popularity
-
Rear Bumpers
Smittybilt SRC Rear Bumper and Tire Carrier with Receiver Hitch (Black) – 76621
- Heavy duty rear bumper with receiver hitch and tire carrier
- Tire carrier supports up to a 35 inch tire
- Bumper is 2 inch by .120 wall tubing with a 2 inch receiver
- Dual stage textured black finish, 5 year limited warranty
SKU: S/B76621 -
Front Bumpers
Smittybilt SRC Front and Rear Bumper with Tire Carrier (Black) – TJSPECIAL03
- Smittybilt SRC front and rear bumper set with tire carrier, part TJSPECIAL03
- Rear receiver is 2 inches; carrier supports a tire up to 35 inches
- 1/4-inch steel plate, zinc undercoating, black powder coat
- Two light tabs and wide winch opening on the front bumper
SKU: ADDTJSPECIAL03 -
-
Front Bumpers
Smittybilt XRC Front Bull Bar Option (Black) – 76811
- Smittybilt XRC front bull bar, part 76811, for the 1984-2001 Jeep Cherokee XJ
- Requires XRC front bumper S/B76810
- 1.75-inch tubing with two light tabs for lights up to 9 inches
- Mounts a winch up to 15,000 lb; 5-year limited warranty
SKU: S/B76811 -
-
Front Bumpers
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs (Bare)- 17-59-010-D
- Poison Spyder Brawler Lite front bumper for Jeep Wrangler JK, part 17-59-010-D
- 3/16-inch bare plate steel with integrated winch mount
- Welded shackle tabs for 3/4-inch recovery shackles
- Recessed buckets for the factory fog lamps
SKU: PSC17-59-010-D -
-
Rear Bumpers
Body Armor JK Wrangler Steel Plate Rear Base Bumper in Textured Black (Black) – JK-2961
Rear BumpersBody Armor JK Wrangler Steel Plate Rear Base Bumper in Textured Black (Black) – JK-2961
- Body Armor 4×4 steel plate rear base bumper for the JK Wrangler, part JK-2961
- Fits 2007-2018 Jeep Wrangler JK (2 and 4-door models)
- 3/16 inch steel plate with gusseted mounting plates
- Double shackles for recovery points
- Notched to retain the factory trailer hitch
SKU: B/AJK-2961
What bumpers-bumpers-tire-carriers-winch-mounts-2 and guards do
A stock bumper is mostly a cosmetic and low-speed impact piece. Aftermarket bumpers-bumpers-tire-carriers-winch-mounts-2 are heavier and often made from steel or aluminum, adding protection, recovery points and mounting space for accessories. Grille guards protect the front end from brush and animal strikes without replacing the whole bumper.
Types of products
- Front bumpers: Full replacements, available with or without a winch mount, and sometimes with light pockets or a bull bar.
- Rear bumpers: Replacements with tire carriers, hitch receivers and recovery points.
- Grille guards: Frames mounted over the front fascia to shield the grille and hood.
- Headlight guards: Cages or brackets that protect lights from rocks and branches.
- Hood bumpers: Small guards over the hood edge.
Choosing between styles
Think about how the vehicle is used. A work truck near wildlife may want a full-width guard. A rock crawler wants a high-clearance, tucked design with good approach angles. A vehicle with a winch needs a bumper with a winch plate rated for its size. Shorter, stubby bumpers-bumpers-tire-carriers-winch-mounts-2 improve approach angle but give less coverage.
What to compare
- Material and thickness: steel adds protection and weight, aluminum saves weight.
- Winch compatibility, mount size and any required fairlead.
- Weight, which affects front suspension, springs and ride height.
- Recovery points, and whether they are rated.
- Compatibility with parking sensors, front cameras, radar and airbags.
- Finish: raw steel, powder coat or textured paint.
Installation notes
Bumpers can be heavy, and a helper or a lift is useful. Some bolt to factory points and others require trimming, drilling or relocating components. Front bumpers-bumpers-tire-carriers-winch-mounts-2 add weight that may need heavier springs to maintain ride height. Wiring for winches and lights needs proper fusing and connectors. Torque all bolts to the maker's specifications and recheck after trail use. Because bumpers-bumpers-tire-carriers-winch-mounts-2 interact with airbags, sensors and crush structures, professional installation is recommended in many cases, and you should read the manufacturer's notes about driver-assist features.
Fitment and legality
Confirm fitment for your exact year, make, model and trim, and check the manufacturer's specifications. Bumper height, width and lighting rules vary by state, so check local regulations.
Matching a bumper to your build
Decide the role of the bumper first: protection, recovery, winching, lighting or looks. Then check the weight limit of your front springs and the winch's size. Heavier bumpers-bumpers-tire-carriers-winch-mounts-2 may need stiffer springs or a leveling adjustment. Approach and departure angles matter off-road, so look at how far the bumper extends and how high the bottom edge sits.
Maintenance and mistakes to avoid
- Using non-rated points for recovery. Only use points the maker says are rated, with correctly sized shackles.
- Forgetting to seal bare steel at welds and edges, which rust quickly.
- Skipping a recheck of the bolts after the first trips.
- Wiring a winch with undersized cable.
Touch up damaged coating promptly, and inspect the welds and mounts for cracks, particularly after hard use.
When weighing styles, remember a stubby bumper ends near the tire for better clearance, while a full-width one adds side coverage; neither suits every need, so think about your usual terrain before choosing.
Popular Bumpers and Grille Guards brands
- Fab Fours (330)
- Smittybilt (138)
- ARB 4x4 Accessories (94)
- Addictive Desert Designs (92)
- Ranch Hand (80)
- Poison Spyder Customs (67)
- Go Rhino (59)
- Rugged Ridge (47)
- Warn (45)
- Westin (42)
- Rampage (37)
- Nfab (35)
Shop Bumpers and Grille Guards by type
- Front Bumpers (770)
- Rear Bumpers (340)
- Grille Guards (107)
- Headlight Guards (19)
- Hood Bumpers (12)
Bumpers and Grille Guards FAQ
Do aftermarket bumpers affect airbags and sensors?
They can. Heavy bumpers change crush behavior, and some block parking sensors, radar or cameras. Choose a bumper that states compatibility with your vehicle's safety systems and follow the maker's instructions.
How much weight does a steel bumper add?
It varies widely by design, from a modest increase for aluminum or stubby styles to well over a hundred pounds for full-width steel with a winch. Check listed weights and consider spring upgrades if needed.
What is the difference between a bumper and a grille guard?
A bumper replaces the factory bumper and supports recovery and winch gear. A grille guard mounts over the existing front fascia to protect the grille and lights, and is generally lighter and less structural.
Do I need a winch-ready bumper?
Only if you plan to install a winch. A winch-ready bumper has a reinforced mounting plate sized for a specific winch. Check the plate dimensions and rating against the winch you intend to use.










