Bumpers and Grille Guards
Showing 1033–1044 of 1248 resultsSorted by popularity
-
-
Front Bumpers
Addictive Desert Designs HoneyBadger Front Bumper (Black) – F017275050103
- HoneyBadger front bumper with winch mount, hammer black bumper and satin black panels
- Top mount for a 40-inch light bar, lower mount for 20-inch, side mounts for 10-inch light bars
- Duallys side mount and HoneyBadger logo cutout
- Part number F017275050103, UPC 700007299211, made in the USA
SKU: ADSF017275050103 -
Front Bumpers
Addictive Desert Designs ADD Lite Front Bumper with Hoop (Black) – F013842940103
- Addictive Desert Designs ADD Lite front bumper with hoop, part F013842940103, for the 2010-2014 Ford F-150 SVT Raptor
- Top mount for up to 10 cube lights or a radius bar combo
- Low profile skid plate that allows a suspension kit
- 100% bolt-on; no winch mount; made in the U.S.A.
SKU: ADSF013842940103 -
Front Bumpers
Addictive Desert Designs Stealth Front Bumper (Black) – F012932450103
- Addictive Desert Designs Stealth front bumper with winch mount, part F012932450103, for the 2010-2014 Ford F-150 SVT Raptor
- Combined winch mount and bumper; winch plate limit 10,500 lbs
- Stealth panels included; Hammer black and Satin black
- Light mounts for 40-inch and 20-inch bars and four Duallys
SKU: ADSF012932450103 -
Front Bumpers
Addictive Desert Designs Stealth Front Bumper (Black) – F012892450103
- Addictive Desert Designs Stealth front bumper, part F012892450103, for the 2010-2014 Ford F-150 SVT Raptor
- Stealth panels included; Hammer black bumper with Satin black panels
- Light mounts for a 40-inch bar, a 20-inch bar and four Duallys
- No winch mount; made in the U.S.A.
SKU: ADSF012892450103 -
Front Bumpers
Addictive Desert Designs Venom R Front Bumper (Black) – F012482990103
- Addictive Desert Designs Venom R front bumper, part F012482990103, for the 2010-2014 Ford F-150 SVT Raptor
- 3/16-inch American steel and .120 wall tubing in Hammer black
- Center mounts for up to 10 cube lights; side mounts for 6-inch SR LEDs
- Bolt-on; no winch mount; made in the U.S.A.
SKU: ADSF012482990103 -
Front Bumpers
Addictive Desert Designs Venom Front Bumper (Black) – F012001250103
- Addictive Desert Designs Venom front bumper, part F012001250103, for the 2010-2014 Ford F-150 SVT Raptor
- Fully boxed frame horns with .120 wall steel tube
- 20-inch light bar mount behind the skid plate
- No winch mount; direct fit, no cutting or welding
SKU: ADSF012001250103 -
Front Bumpers
Addictive Desert Designs Stealth Fighter Front Bumper (Black) – F011052520103
- Addictive Desert Designs Stealth Fighter front bumper, part F011052520103, for the 2010-2014 Ford F-150 SVT Raptor
- Winch mount plate of 1/4-inch steel with a 10,500 lbs limit
- Top and side light mounts for 20-inch, 6-inch and dual 6-inch lights
- Direct fit, no cutting or welding; made in the U.S.A.
SKU: ADSF011052520103 -
Front Bumpers
Addictive Desert Designs Light Mount Kit (Black) – ACNA158501NA
- Universal light mount kit for select Addictive Desert Designs bumpers
- Works with light bars and lights from different brands and sizes
- Powder coated steel, D-ring, light and winch mounts not included
- Part number ACNA158501NA, UPC 700007736291
SKU: ADSACNA158501NA -
Front Bumpers
Addictive Desert Designs Adaptive Cruise Control Bracket – AC15152503NA
- Addictive Desert Designs adaptive cruise control bracket, part AC15152503NA, for the Ford F-150 and F-150 Raptor
- Relocates the adaptive cruise control module
- Compatible with all Addictive Desert Designs front bumpers
- Satin black steel
SKU: ADSAC15152503NA -
Front Bumpers
Smittybilt XRC Front and Rear Bumper with Tire Carrier (Black) – TJSPECIAL02
- Smittybilt XRC front and rear bumper with tire carrier, part TJSPECIAL02, for 1997-2006 Jeep Wrangler TJ and LJ
- Textured matte black powder coat; 3/16-inch cold rolled steel
- Carrier takes up to a 37-inch tire; winch up to 10,000 lb
- 3rd brake light bracket, gas can mount and jack mount included
SKU: ADDTJSPECIAL02 -
Front Bumpers
Poison Spyder Brawler Front Bumper
- Poison Spyder Brawler front bumper, part JKSPECIAL15, for the 2007-2016 Jeep Wrangler JK 2-door
- Mid-width, high clearance 3/16-inch bare plate steel
- Integrated winch mount and Hi-Lift jack mount
- Rocker Knockers and tire carrier covered up to 40-inch spares
SKU: ADDJKSPECIAL15
What bumpers-bumpers-tire-carriers-winch-mounts-2 and guards do
A stock bumper is mostly a cosmetic and low-speed impact piece. Aftermarket bumpers-bumpers-tire-carriers-winch-mounts-2 are heavier and often made from steel or aluminum, adding protection, recovery points and mounting space for accessories. Grille guards protect the front end from brush and animal strikes without replacing the whole bumper.
Types of products
- Front bumpers: Full replacements, available with or without a winch mount, and sometimes with light pockets or a bull bar.
- Rear bumpers: Replacements with tire carriers, hitch receivers and recovery points.
- Grille guards: Frames mounted over the front fascia to shield the grille and hood.
- Headlight guards: Cages or brackets that protect lights from rocks and branches.
- Hood bumpers: Small guards over the hood edge.
Choosing between styles
Think about how the vehicle is used. A work truck near wildlife may want a full-width guard. A rock crawler wants a high-clearance, tucked design with good approach angles. A vehicle with a winch needs a bumper with a winch plate rated for its size. Shorter, stubby bumpers-bumpers-tire-carriers-winch-mounts-2 improve approach angle but give less coverage.
What to compare
- Material and thickness: steel adds protection and weight, aluminum saves weight.
- Winch compatibility, mount size and any required fairlead.
- Weight, which affects front suspension, springs and ride height.
- Recovery points, and whether they are rated.
- Compatibility with parking sensors, front cameras, radar and airbags.
- Finish: raw steel, powder coat or textured paint.
Installation notes
Bumpers can be heavy, and a helper or a lift is useful. Some bolt to factory points and others require trimming, drilling or relocating components. Front bumpers-bumpers-tire-carriers-winch-mounts-2 add weight that may need heavier springs to maintain ride height. Wiring for winches and lights needs proper fusing and connectors. Torque all bolts to the maker's specifications and recheck after trail use. Because bumpers-bumpers-tire-carriers-winch-mounts-2 interact with airbags, sensors and crush structures, professional installation is recommended in many cases, and you should read the manufacturer's notes about driver-assist features.
Fitment and legality
Confirm fitment for your exact year, make, model and trim, and check the manufacturer's specifications. Bumper height, width and lighting rules vary by state, so check local regulations.
Matching a bumper to your build
Decide the role of the bumper first: protection, recovery, winching, lighting or looks. Then check the weight limit of your front springs and the winch's size. Heavier bumpers-bumpers-tire-carriers-winch-mounts-2 may need stiffer springs or a leveling adjustment. Approach and departure angles matter off-road, so look at how far the bumper extends and how high the bottom edge sits.
Maintenance and mistakes to avoid
- Using non-rated points for recovery. Only use points the maker says are rated, with correctly sized shackles.
- Forgetting to seal bare steel at welds and edges, which rust quickly.
- Skipping a recheck of the bolts after the first trips.
- Wiring a winch with undersized cable.
Touch up damaged coating promptly, and inspect the welds and mounts for cracks, particularly after hard use.
When weighing styles, remember a stubby bumper ends near the tire for better clearance, while a full-width one adds side coverage; neither suits every need, so think about your usual terrain before choosing.
Popular Bumpers and Grille Guards brands
- Fab Fours (330)
- Smittybilt (138)
- ARB 4x4 Accessories (94)
- Addictive Desert Designs (92)
- Ranch Hand (80)
- Poison Spyder Customs (67)
- Go Rhino (59)
- Rugged Ridge (47)
- Warn (45)
- Westin (42)
- Rampage (37)
- Nfab (35)
Shop Bumpers and Grille Guards by type
- Front Bumpers (770)
- Rear Bumpers (340)
- Grille Guards (107)
- Headlight Guards (19)
- Hood Bumpers (12)
Bumpers and Grille Guards FAQ
Do aftermarket bumpers affect airbags and sensors?
They can. Heavy bumpers change crush behavior, and some block parking sensors, radar or cameras. Choose a bumper that states compatibility with your vehicle's safety systems and follow the maker's instructions.
How much weight does a steel bumper add?
It varies widely by design, from a modest increase for aluminum or stubby styles to well over a hundred pounds for full-width steel with a winch. Check listed weights and consider spring upgrades if needed.
What is the difference between a bumper and a grille guard?
A bumper replaces the factory bumper and supports recovery and winch gear. A grille guard mounts over the existing front fascia to protect the grille and lights, and is generally lighter and less structural.
Do I need a winch-ready bumper?
Only if you plan to install a winch. A winch-ready bumper has a reinforced mounting plate sized for a specific winch. Check the plate dimensions and rating against the winch you intend to use.











