Overview
The Smittybilt XRC front and rear bumper with tire carrier, part number TJSPECIAL02, is a Genuine Packages set of XRC bumpers and a swing-away tire carrier for the 1997-2006 Jeep Wrangler TJ and the 2004-2006 Wrangler Unlimited (LJ). The set is finished in a two-stage textured matte black powder coat.
The front stinger is made of 1.75-inch tubing with two light tabs that hold up to two 9-inch lights. Smittybilt says its design can mount a winch up to 10,000 lb, with the option of an aluminum or roller fairlead. The rear bumper is 3/16-inch cold rolled steel with a built-in Class III receiver hitch and two solid D-ring mounts welded inside and out.
Smittybilt says each bumper is developed as a complete bolt-on that requires no modifications to the vehicle. The package adds a 3rd brake light bracket and integrated gas can and jack mounts, and the carrier accommodates a 37-inch tire.
Key features
- Two-stage textured matte black powder coat
- Gen2 solid D-ring and jack point mount, welded inside and out
- Includes a 3rd brake light bracket
- Integrated gas can and jack mounts
- Accommodates a 37-inch tire
- Front stinger of 1.75-inch tubing with two light tabs
- Winch capacity up to 10,000 lb with aluminum or roller fairlead
- Rear bumper with built-in Class III receiver hitch
- Complete bolt-on, no vehicle modifications
Matching a bumper to your build
A full bumper set changes the balance of the vehicle, so think about how the front and rear pieces work together on steep ground. A stinger-style front bumper gives clearance for approach angles, while a rear bumper with a receiver adds a mounting point for trailers and recovery hitches. Each piece should be checked for fit before it is fully bolted on.
Powder coated steel holds up well when the finish stays intact. Touch up chips right away, especially on corners and welds, and clean mud from the hinge area of a swing-away carrier so it moves freely. Wiring for lights and a winch should use fuses and protected routing, and any added weight should be considered in suspension and brake planning.
- Check winch rating against the mount
- Touch up powder coat chips promptly
- Route light and winch wiring with fuses
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | TJSPECIAL02 |
| UPC | 700007573861 |
| Product | XRC front and rear bumper set with tire carrier |
| Material | Cold rolled steel, 3/16 in rear bumper |
| Finish | Two-stage textured matte black powder coat |
| Front stinger tubing | 1.75 in |
| Light tabs | Two, each for up to two 9 in lights |
| Winch capacity | Up to 10,000 lb |
| Tire size | Up to 37 in |
| Rear hitch | Built-in Class III receiver |
| Width | Full |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
Smittybilt lists TJSPECIAL02 for the 1997-2006 Jeep Wrangler TJ and the 2004-2006 Jeep Wrangler LJ, the Unlimited models.
The 2007-2018 JK and later JL Wranglers are not covered, and the 1987-1995 YJ is not in the list either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Smittybilt says no vehicle modifications are required. Lights on the front tabs should be fed through a fused relay, and the winch should be rated within the 10,000 lb capacity quoted.
What’s included
- XRC front bumper with stinger and winch provisions
- Rear bumper with Class III receiver
- Swing-away tire carrier
- 3rd brake light bracket
Not included: a winch, fairlead, lights and the tire.
























