Overview
The Poison Spyder Brawler front bumper, part number JKSPECIAL15, is a Genuine Packages bare steel package for the 2007-2016 two-door Jeep Wrangler JK. It centers on a mid-width, high clearance front bumper made of 3/16-inch plate steel, with an integrated winch mount and a mount for a Hi-Lift jack.
Poison Spyder’s description also covers a body-mounted tire carrier for a spare up to 40 inches, a BFH bumper with Brawler Bar and the JK Rocker Knockers. The Rocker Knockers use a 1.75-inch by .120 wall rocker rail and a slider rail of 1.5-inch by .120 wall tubing, with a slider skid in between that is attached with countersunk stainless steel flat head cap screws.
Because the Rocker Knockers bolt to the body tub, a body lift carries them up with the body. Poison Spyder adds that frame-mounted competitors may leave a gap on lifted vehicles.
Key features
- Mid-width high clearance bumper, 3/16-inch plate steel
- Integrated winch mount
- Mount for a Hi-Lift jack
- Rocker rail 1.75-inch by .120 wall DOM tubing
- Slider skid with exclusive oval dimples
- Skid fastened with countersunk stainless steel screws
- A body-mounted tire carrier holds a spare up to 40 inches.
- Bare steel
Protecting a steel front end
A steel front bumper takes most of the impact when the Jeep hits brush, boulders or a tree. Mounting it with bolts into reinforced frame points keeps the load spread out. Skid plates and rocker guards work alongside a bumper and should be fitted so they do not rub or trap debris against each other.
Winch installs add weight and stress at the bumper center, so check the bolts, welds and mounting plates after heavy recovery work. Removable parts such as skids make repairs simpler, because a damaged piece can be swapped without replacing the whole assembly. Keep a record of fastener torque after each install.
- Check bumper bolts after winch use
- Inspect skids and guards after rocky trails
- Remove debris from mounting areas
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKSPECIAL15 |
| UPC | 700007616871 |
| Product | Brawler front bumper package |
| Material | Steel plate, 3/16 in |
| Finish | Bare |
| Width | Stubby (mid-width) |
| Body styles | 2-door models |
| Rocker rail tubing | 1.75 in by .120 wall DOM |
| Slider rail tubing | 1.5 in by .120 wall DOM |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
It fits 2-door 2007-2016 Jeep Wrangler JK models, not the Unlimited.
The 2017-2018 model years and other Wrangler generations are not covered. The 4-door Unlimited version is JKSPECIAL14. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The Rocker Knockers bolt to the body tub, and the outer skid can be removed if damaged or if you want to refinish it. Coat the bare steel for outdoor use. The tire carrier works with stock and aftermarket rear bumpers.
What’s included
- Brawler front bumper
- Items described: Rocker Knockers and body-mounted tire carrier
Not included: a winch, finish coats and a spare tire.
























