Power Stop Z23 vs Z36 explained: what each brake kit is for, what is in the box, which kits fit your truck or Jeep,…
Disc Brake Rotors
Showing 505–516 of 764 resultsSorted by popularity
-
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear 18-20 Ford F150 18-21 Expedition And 18-21 Lincoln Navigator (W/ Electric Park Brake) – 99207-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear 18-20 Ford F150 18-21 Expedition And 18-21 Lincoln Navigator (W/ Electric Park Brake) – 99207-020
- Fits 2018–2020 Ford F-150, 2018–2021 Ford Expedition and 2018–2021 Lincoln Navigator with electric parking brake
- Baer Brakes part 99207-020, rear Claw rotor set
- Vented, cross-drilled and slotted cast iron rotors with zinc-plated finish
- Premium, mill balanced direct replacement design
- UPC 90127970607, sold as a set
SKU: 99207-020-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 18-20 Ford F150 18-21 Expedition And 18-21 Lincoln Navigator (W/ Electric Park Brake) – 99207-220
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 18-20 Ford F150 18-21 Expedition And 18-21 Lincoln Navigator (W/ Electric Park Brake) – 99207-220
- Slot-only, zinc-plated rear rotor set for 2018–2020 Ford F-150, 2018–2021 Ford Expedition and 2018–2021 Lincoln Navigator
- Fits vehicles with an electric parking brake
- Baer Brakes part number 99207-220, sold as a set of two
- Brake lubricant and ABS tone ring are not included
SKU: 99207-220-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear 21-26 F150 2/4WD W/336Mm Rear Brake Rotor – 99208-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear 21-26 F150 2/4WD W/336Mm Rear Brake Rotor – 99208-020
- Cross-drilled and slotted rear rotor set for the 2021–2026 Ford F-150 (Rear) with the 336 mm rear brake rotor
- Baer Brakes part number 99208-020, sold as a set of two
- Premium, vented, one-piece full cast rotors with chamfered drilled holes and zinc-plated finish
- Bearings and ABS tone ring are not included
SKU: 99208-020-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 21-26 F150 2/4WD W/336Mm Rear Brake Rotor – 99208-220
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 21-26 F150 2/4WD W/336Mm Rear Brake Rotor – 99208-220
- Rear brake rotor for the 2021-2026 Ford F-150 (RWD and 4WD, with 336 mm rear rotor)
- Part number 99208-220, sold as a set (pair) of slotted, zinc-plated direct replacement rotors
- Vented, full cast one-piece cast iron construction, 336 mm outside diameter
- Bearings, brake lubricant and ABS tone ring not included
SKU: 99208-220-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear 21-26 F150 2/4WD W/350Mm Rear Brake Rotor – 99208HD-020
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear 21-26 F150 2/4WD W/350Mm Rear Brake Rotor – 99208HD-020
- Direct replacement rear rotor set for the 2021–2026 Ford F-150 (Rear) with the 350 mm rear brake rotor, 2WD and 4WD
- Baer Brakes part number 99208HD-020, sold as a set of two rotors
- Premium cast iron, vented, slotted and cross-drilled friction surface with zinc-plated finish
- ABS tone ring and wheel bearings are not included
SKU: 99208HD-020-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 21-26 F150 2/4WD W/350Mm Rear Brake Rotor – 99208HD-220
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 21-26 F150 2/4WD W/350Mm Rear Brake Rotor – 99208HD-220
- Fits 2021–2026 Ford F-150 trucks with rear 350 mm brake rotors, RWD and 4WD
- Part number 99208HD-220: slotted and zinc-plated Claw rear rotor pair
- Outside diameter 350 mm (13.78 in), nominal thickness 24 mm (.945 in)
- Direct replacement cast iron rotors, sold as a set
- Limited 1 year warranty, Baer Brakes
SKU: 99208HD-220-BKCZ -
Disc Brake Rotors
Baer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 21-25 Ford Bronco (Excl. Raptor And Sport) – 99210-220
Disc Brake RotorsBaer Brakes Claw Performance Rotors Rear (Slot/Zinc Only) 21-25 Ford Bronco (Excl. Raptor And Sport) – 99210-220
- Rear slot-only Claw performance rotors for 2021-2025 Ford Bronco
- Part number 99210-220 from Baer Brakes, sold as a set
- Zinc-plated slotted friction surface with vented, full cast construction
- Ford Bronco Raptor and Sport versions are excluded by the product name
SKU: 99210-220-BKCZ -
Disc Brake Rotors
Power Stop Evolution Performance Drilled and Slotted Front Brake Rotors – AR8400XPR
Disc Brake RotorsPower Stop Evolution Performance Drilled and Slotted Front Brake Rotors – AR8400XPR
- Front rotors for 1971–1991 Chevrolet Blazer and Suburban, GMC Jimmy and K1500, and Jeep Grand Wagoneer (see list)
- Drilled, slotted and silver zinc-dichromate plated
- 100% mill balanced; supplied as a pair
- Power Stop part number PSTAR8400XPR
SKU: PSTAR8400XPR -
-
Disc Brake Rotors
Power Stop Evolution Drilled and Slotted Rear Brake Rotors – JBR1737XPR
- Rear rotors for the 2016–2021 Lexus RX350 and RX450h, including the L models
- Slotted and cross drilled, Tru-Cast machined
- Mill balanced, zinc plated; supplied as a pair
- Power Stop part number PSTJBR1737XPR
SKU: PSTJBR1737XPR -
-
What brake rotors do
The rotor is the disc that the brake pads clamp to slow the wheel. Braking turns motion into heat, and the rotor has to absorb and shed that heat without warping or cracking. Most vehicles use a vented rotor on the front, where most braking force is applied, and either a vented or solid rotor on the rear.
Rotor surface styles
- Smooth OE-style: matches factory design, runs quietly and works well for daily driving and light towing.
- Slotted: shallow slots sweep away dust and gases and help keep the pad surface fresh, often with slightly more pad wear.
- Cross-drilled: holes help vent gas and water and can reduce weight, though they can be more prone to cracking under extreme heat.
- Drilled and slotted: combines both patterns for a sporty appearance and wet-weather bite.
How to choose
Match the rotor to how you use the vehicle. Daily commuting and highway use usually suit a plain OE-style rotor. Towing, hauling and mountain driving put more heat into the brakes, so slotted or drilled designs and matching pads may help. Rock crawling and low-speed trail work are rarely limited by rotor design, so dependable fit and corrosion resistance often matter more.
Pay attention to position (front or rear), side if the rotor is directional, and whether the listing is one rotor or a set of two. Some rotors are listed for a certain caliper style, such as 6-bolt calipers, so verify against your vehicle. Corrosion-resistant coatings help in regions with road salt.
Installation notes
Replace rotors in axle pairs so the braking force stays even. Fresh pads are usually recommended with new rotors, and the hub face should be clean before the rotor is installed. Follow the torque specification for the wheel lug nuts and caliper bracket bolts, and follow the pad and rotor maker's bed-in procedure. Brakes are a safety system, so if you are not comfortable with the work, have a qualified shop do it.
Confirming fitment
Rotor size, bolt pattern and hat height differ by year, model, trim and brake package, and a model can have more than one rotor size in the same year. Confirm fitment for your exact vehicle and check the manufacturer's specifications before choosing a part number.
Pairing rotors with pads and fluid
Rotors and pads work as a pair, so choose them together. A smooth OE-style rotor generally pairs with a standard ceramic or semi-metallic pad, while slotted or drilled rotors are often matched to pads from the same family for predictable bite and dust levels. Mixing very aggressive pads with a basic rotor can increase wear on the rotor surface, and soft pads on a performance rotor can feel underwhelming. Brake fluid ages too: it absorbs moisture over time and its boiling point drops, which matters on long descents or when towing. Many manufacturers recommend changing fluid on a regular schedule, so consider a flush when you do brake work. Finally, inspect hoses, calipers, slide pins and hardware while the wheels are off, since a worn caliper or seized pin can ruin a new rotor quickly.
Related guides
- Z23 vs Z36: Stop Guessing Which Power Stop Brake Kit You Need
Popular Disc Brake Rotors brands
- Baer Brakes (511)
- Power Stop (161)
- EBC Brakes (65)
- Stainless Steel Brakes (15)
- Power Slot (10)
- Crown Automotive (7)
- RT Off-Road (2)
- Trail Gear (1)
- Omix-Ada (1)
Disc Brake Rotors FAQ
How often should brake rotors be replaced?
There is no fixed mileage. Replace rotors when they fall below the minimum thickness stamped on them, or when they show deep grooves, cracks, heavy rust pitting or persistent pulsation. A mechanic can measure thickness with a micrometer.
Are drilled and slotted rotors better for off-road driving?
Not necessarily. They can help with heat and wet braking on road and towing use, but slow trail driving rarely depends on them. Plain OE-style rotors are common and quiet, so choose by how you drive.
Should I replace brake pads when I replace rotors?
Fresh pads are generally recommended, since used pads have worn to the old rotor surface and can cause noise or uneven wear. Choose pads that suit the rotor type and follow the manufacturer's bed-in procedure.
What does a rotor with a left or right designation mean?
Some slotted or directional rotors are made for a specific side so the pattern sweeps debris the right way. If a listing says left, right, driver or passenger, order the matching side for the position you need.




