Select your vehicle

Power Stop Evolution Drilled and Slotted Rear Brake Rotors – JBR1598XPR

Power Stop

$135.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 5:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rotors for the 2016–2021 Mazda CX-3
  • Slotted and cross drilled, Tru-Cast machined
  • Mill balanced, zinc plated; supplied as a pair
  • Power Stop part number PSTJBR1598XPR

Description

Overview

The Power Stop Evolution JBR1598XPR (part number PSTJBR1598XPR) is a pair of drilled and slotted brake rotors for the 2016–2021 Mazda CX-3.

Tru-Cast machining is used on the build, and the cross-drilled holes are designed to keep rotors up to 180F cooler. The rotors are mill balanced, G3000 grade cast and zinc plated.

Cross-drilled holes let heat and gas escape, and the slots sweep away water, gas and dust between pad and rotor. Together these help keep a clear contact patch and reduce fade.

One part number covers every CX-3 from 2016 through 2021, including the earlier and later years of that run.

Key features

  • Cross-drilled holes are designed to keep rotors up to 180F cooler.
  • Precision machined using Tru-Cast technology
  • Rotor run-out within 0.0015 and DTV tolerance within 0.005
  • All Evolution rotors are mill balanced
  • Rounded slots keep a clear contact patch by sweeping away water, gas and dust
  • Silver zinc plated to shield against rust during normal operation
  • Reduces fade; G3000 grade cast
  • Supplied as a pair

Pad and rotor pairing

Compact crossovers see frequent stop-and-go traffic, which means brakes cycle often at moderate temperatures. Slotted and cross-drilled rotors suit that pattern, since the openings keep the pad face clear of water and grit. Pads with a matching friction rating give predictable stopping under daily driving.

Before installing, measure the rotor hat and hub for rust or debris. Light surface rust on the mounting face can be cleaned with a wire brush, but pitting calls for a new hub or a repaired surface. Bed in new pads with a series of moderate stops rather than hard full stops.

  • Replace pads and rotors as a set on the same axle
  • Check fluid level after the caliper is pressed back
  • Recheck lug torque after the first few stops

Specifications

Brand Power Stop
Part number PSTJBR1598XPR
Product type Brake rotors, drilled and slotted
Disc material Cast iron (G3000 grade)
Coating Silver zinc plated
Run-out Within 0.0015
DTV tolerance Within 0.005
Quantity Pair
Fit Direct fit

Vehicle fitment

It fits the 2016–2021 Mazda CX-3 in Sport, Touring and Grand Touring versions. One part number covers all six model years.

The Mazda CX-30 and CX-5 are not in the list, and CX-3 models built before 2016 are not covered either. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Replace both rotors on the axle together and fit new pads, so the pad faces match the new discs and wear evenly from the start.

What’s included

Two rotors, supplied as a pair.

Not included: Brake pads, mounting hardware and the rotors for the other axle.

Fitment

VehicleYearsTrims
Mazda CX-32016–2021Grand Touring, Sport, Touring

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the JBR1598XPR fit a 2016 Mazda CX-3?

Yes. The JBR1598XPR is a direct fit for every Mazda CX-3 from 2016 through 2021, so one part number covers all six model years in that range.

Does the JBR1598XPR fit a Mazda CX-30?

No. Fitment covers the 2016–2021 CX-3 only, so a CX-30 needs a different rotor. Check the model year and trim against your vehicle before buying.

What is the JBR1598XPR made of?

The Evolution rotor is G3000 grade cast with silver zinc plating to resist rust during normal use, and it is mill balanced before use.

What should I check when replacing rear rotors?

Check the hub and mating faces for rust and debris, and confirm the lug studs are straight. Make sure the new rotor sits flat before installing the pads, then re-torque the wheel bolts after the first few stops.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon