Overview
The Power Stop Evolution JBR1737XPR (part number PSTJBR1737XPR) is a pair of rear drilled and slotted brake rotors for the 2016–2021 Lexus RX350 and RX450h and the 2018–2021 Lexus RX350L and RX450hL.
Power Stop’s Tru-Cast machining is used here, and the cross-drilled holes are said to keep rotors up to 180F cooler. Slots sweep away water, gas and dust, and the rotors are zinc plated against rust.
The RX350L and RX450hL are the long-wheelbase versions, and the same rear rotor fits them as the standard RX. The rotor is mill balanced and G3000 grade cast.
Reducing fade is a goal of the slot design, which also keeps the pad contact patch clear. The rotors suit custom or factory wheels.
Key features
- Cross-drilled holes help keep rotors up to 180F cooler.
- Precision machined using Tru-Cast technology
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- All Evolution rotors are mill balanced
- Rounded slots keep a clear contact patch by sweeping away water, gas and dust
- Silver zinc plated to shield against rust during normal operation
- Reduces fade; G3000 grade cast
- Supplied as a pair
Rear rotor replacement basics
Rear rotors take heavy braking loads on a crossover this size, and they wear faster when pads are worn or caliper slide pins are sticking. Drilled and slotted rotors are built to shed heat and gas, which helps keep pedal feel consistent during repeated stops such as mountain descents or stop-and-go traffic with a loaded vehicle.
When replacing rear rotors, swap both sides at the same time so braking stays even. Clean the hub face and wheel studs, and confirm the new rotor sits flat against the hub before fitting the wheel. Bed in new pads with a series of moderate stops before any hard braking.
- Inspect caliper slide pins while the rotor is off
- Watch for pulsation under light braking
- Check for cracks around the drilled holes
- Replace pads in the same service
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTJBR1737XPR |
| Product type | Rear brake rotors, drilled and slotted |
| Position | Rear |
| Disc material | Cast iron (G3000 grade) |
| Coating | Silver zinc plated |
| Run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Quantity | Pair |
| Fit | Direct fit |
Vehicle fitment
It fits the 2016–2021 Lexus RX350 and RX450h and the 2018–2021 Lexus RX350L and RX450hL. The RX350 and RX450h in Base and F Sport trims are covered, along with the RX350L and RX450hL in Base trim.
Earlier RX models, before 2016, are not covered by this part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace both rear rotors together and fit new rear pads, so each side has a fresh matched friction surface. The RX front rotors are separate parts and are not covered here.
What’s included
Two rear rotors.
Not included: Brake pads and mounting hardware.










