Select your vehicle

Showing 13–20 of 20 resultsSorted by popularity

Where spindle seals live

On a front axle with locking hubs or a spindle-mounted hub, the outer axle shaft passes through a spindle bolted to the knuckle, riding on a needle bearing at the inner end. A spindle seal sits at the back of the spindle around the shaft to keep wheel bearing grease in and mud and water out, and a second seal, often a V-ring or dust shield, sits on the shaft where it meets the spindle. On closed-knuckle axles such as the Dana 25 and 27 and the Toyota 8 inch, a knuckle seal wipes the ball at the back of the knuckle. All of these are the first line of defense for the needle bearing and the axle U-joint, and they fail quietly: the first sign is usually rust-colored grease or a dry, screaming spindle bearing.

Matching the seal to the axle

  • Dana 30 and small Dana 44: the Dana Spicer small V-ring seal with a 1.313 inch shaft diameter fits the front Dana 30 and Dana 44. Crown's small and large V-ring seals cover the 1977 to 1986 CJ5 and CJ7 and SJ Wagoneer and J-trucks.
  • Dana 30, 44 and GM 10 bolt: the Dana Spicer spindle seal kit with inner spindle bearing, V-lip seal, nylon thrust washer and stub axle seal covers the Dana 30 Standard, Dana 44 and the GM 8.5 inch 10 bolt front.
  • Dana 60 and 61: the Dana 60 spindle seal kit includes the same four parts for the heavy front axle. The late-model Ford style seal is a different design that seals better than the original V-lip and requires removing the stub axle slinger first.
  • Early Jeep closed knuckle: the Crown knuckle seal kit for the Dana 25 and 27 on 1941 to 1971 Willys and Jeep models replaces the felt and rubber wiper around the knuckle ball.
  • Toyota 8 inch: Trail Gear's knuckle ball wiper seal kit uses a double-sided polyurethane seal with rock rings and bolts for the 1979 to 1995 pickup and 4Runner solid axle.

Identify the axle from its tag or cover shape and measure the shaft diameter at the seal before choosing; a Dana 44 came in several shaft sizes.

Why replace the whole kit

The inner spindle bearing and the seal wear together. If water has reached the seal, the needle bearing behind it has been running in a slurry and should be replaced, which is why the Dana Spicer kits bundle the bearing, thrust washer and both seals. Replacing only the outer seal on a worn bearing leaves the shaft wobbling and the new seal fails within months. A wheel hub bearing seal, like the Crown front inner hub seal for the Dana 44 on 1974 to 1991 SJ models, belongs in the same inspection because it shares the spindle.

Installation notes

Spindle work means removing the hub, rotor and spindle, so inspect the spindle surface for scoring where the bearing rides. Drive the old needle bearing out from the back, press the new one in square to the depth specified, and set the seal with a driver of the right diameter so the lip is not folded. Pack the bearing and fill the seal lip with wheel bearing grease. Torque spindle nuts and hub bolts to the manufacturer's specification and set wheel bearing preload per the service manual. For Trail Gear's knuckle wipers, bolt the rock rings evenly so the seal sits flat on the ball. This is steering and wheel bearing work, so if you are unsure about preload, have a shop finish it. Confirm the kit is listed for your exact axle and year before choosing.

Popular Spindle Seal brands

Spindle Seal FAQ

How do I know my spindle seal is leaking?

Look behind the hub for grease slung onto the knuckle and brake backing plate, or for a dry, rusty look at the back of the spindle. A grinding or squealing noise from the front hub in two-wheel drive that changes with speed often means the spindle needle bearing has run dry behind a failed seal.

What is the difference between a V-ring seal and a V-lip seal?

A V-ring is a rubber ring that rides on the shaft and seals against a flat face as it spins, acting as a slinger. A V-lip seal is a conventional lip seal pressed into the spindle. Many front axles use both, and the Dana Spicer kits include each type where the axle uses it.

Should I replace the spindle bearing when I do the seal?

Yes, if the seal has been leaking or the bearing shows any rust, roughness or wobble. The needle bearing behind the seal fails from the same water intrusion that ruins the seal, and a worn bearing will destroy a new seal quickly. The kits bundle both for this reason.

Do I need to remove the stub axle slinger for the Ford style Dana 60 seal?

Yes. The late-model Ford style seal, as Dana Spicer notes, occupies the space the original slinger used and seals directly on the shaft. Remove the slinger before fitting it. If you keep the original V-lip style seal instead, the slinger stays in place.