Overview
The Dana Spicer small spindle seal, part number 36361, is an oil seal for the spindle on front Dana 30 and Dana 44 axles. It is an OE replacement seal made in the USA.
It is a U cup seal with a 1.625 inch housing diameter, a 1.313 inch shaft diameter and a 0.156 inch thickness. This seal is a U cup design, so compare the lip design with your old seal before fitting.
Key features
- OE replacement design
- Made in the USA
- 1.625 inch housing diameter
- 1.313 inch shaft diameter
- 0.156 inch thickness
Measuring and replacing a spindle seal
The spindle seal keeps grease and gear oil in the hub area and keeps water and grit out of the bearing. When the lip wears or hardens, the seal can leak onto the brake components and the inside of the wheel. Inspecting the seal whenever the spindle is apart is a simple way to catch a leak early.
Measure the old seal’s housing and shaft diameters, and check the lip design, before ordering. Clean the bore and shaft surfaces thoroughly, and lube the seal lip lightly before seating it square. Seal damage often comes from a bent or scored shaft, so inspect that surface before fitting the new seal.
- Check the bore for scoring
- Seat the seal square in the housing
- Replace the bearing and washer if they are worn
- Keep the seal dry until it is installed
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 36361 |
| UPC | 70000006737 |
| Seal type | U cup (titled V-ring) |
| Housing diameter | 1.625 inch |
| Shaft diameter | 1.313 inch |
| Thickness | 0.156 inch |
| Axle location | Front |
| Axle types | Dana 30, Dana 44 (Dana 30 Standard named) |
| Origin | Made in the USA |
| Fitment | Universal fit |
Vehicle fitment
Fit is by axle type: front Dana 30 and Dana 44 axles, with the Dana 30 Standard type included. Fit is universal across those types.
Confirm the housing and shaft diameters against your axle before ordering, since the seal is sized to those measurements. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the old seal against the 1.625 inch housing and 1.313 inch shaft diameters before fitting the new one, since a seal of the wrong size will not seat.
What’s included
The package contains the seal only. Not included: The spindle, bearing and washer are not part of this package. Check them against your installation before starting.














