Jeep Wrangler (JL) Drivetrain & Differential
49 drivetrain & differential listed for the 2018–2026 Jeep Wrangler (JL)
Every part on this page is listed by its maker for this model; the most represented brands are G2 Axle and Gear, Dana Spicer and ARB 4x4 Accessories. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Narrow it down: Performance Axle Components 31
Showing 1–24 of 49 resultsSorted by popularity
-
Axle Ball Joints, Drivetrain & Differential, Performance Axle Components
TeraFlex Dana 30/44 Heavy-Duty Ball Joint Kit without Knurl – 3452010
Axle Ball Joints, Drivetrain & Differential, Performance Axle ComponentsTeraFlex Dana 30/44 Heavy-Duty Ball Joint Kit without Knurl – 3452010
- Heavy-duty ball joint kit for Jeep JL and JT, part TER3452010
- Fits Dana 30 or Dana 44 front axles
- Built for oversized tires and offset wheels
- Lubeable, direct fit
SKU: TER3452010 -
Differential Guards, Drivetrain & Differential, Performance Axle Components
Rough Country Front M186 Differential Skid Plate – 10623
Differential Guards, Drivetrain & Differential, Performance Axle ComponentsRough Country Front M186 Differential Skid Plate – 10623
- Front M186 differential skid plate for the Jeep Wrangler JL (part number 10623)
- 1/4 inch plate steel for underside protection
- Easy bolt-on installation with no cutting or drilling
- Allows access to the differential drain plug
SKU: R/C10623 -
Drive Shafts, Drive Shafts & Drive Shaft Components, Drivetrain & Differential
Rough Country Front CV Drive Shaft – 5090.1A
Drive Shafts, Drive Shafts & Drive Shaft Components, Drivetrain & DifferentialRough Country Front CV Drive Shaft – 5090.1A
- Front CV driveshaft for 2018–2026 Jeep Wrangler JL
- Designed for JL lifts of 3.5 inches or more
- Corrects driveshaft damage at full droop
- Fits Dana 30 front axle models
- Part number R/C5090.1A
SKU: R/C5090.1A -
Differential Guards, Drivetrain & Differential, Performance Axle Components
Rancho Rear Dana 44 Glide Plate – RS62117
Differential Guards, Drivetrain & Differential, Performance Axle ComponentsRancho Rear Dana 44 Glide Plate – RS62117
- Rear Dana 44 glide plate for the Jeep Wrangler JL and related models (part number RS62117)
- Mounts to the rear axle casting, with no cutting or drilling
- 1/4 inch high-strength, low-alloy steel with red powder coat
- Works with OE and most aftermarket differential covers
SKU: RANRS62117 -
Differential Guards, Drivetrain & Differential, Performance Axle Components
Rancho Front Dana 44 Glide Plate – RS62116
Differential Guards, Drivetrain & Differential, Performance Axle ComponentsRancho Front Dana 44 Glide Plate – RS62116
- Front Dana 44 glide plate for the Jeep Wrangler JL (part number RS62116)
- Mounts to the front axle casting, with no cutting or drilling
- 1/4 inch high-strength, low-alloy steel with red powder coat
- Works with OE and most aftermarket differential covers
- Smoother glide over obstacles, forwards and backwards
SKU: RANRS62116 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL/JK Dana 30 Front 5.13 Ring and Pinion – 1-2050-513R
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL/JK Dana 30 Front 5.13 Ring and Pinion – 1-2050-513R
- Based on the product title and description, fits the front Dana 30 axle of 2018–2026 Jeep Wrangler JL and 2007–2018 Jeep Wrangler JK models
- 5.13 ratio ring and pinion, part number G/21-2050-513R
- Forged 8620 steel with tight tolerances for easier setup
- Heat treated and lapped for a smoother mesh surface
SKU: G/21-2050-513R -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL/JK Dana 30 Front 4.88 Ring and Pinion – 1-2050-488R
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL/JK Dana 30 Front 4.88 Ring and Pinion – 1-2050-488R
- Based on the product title and description, fits the front Dana 30 axle of 2018–2026 Jeep Wrangler JL and 2007–2018 Jeep Wrangler JK models
- 4.88 ratio ring and pinion, part number G/21-2050-488R
- Forged 8620 steel gears, precision-machined to OE specifications
- Lapped mating surface and heat treated gears
SKU: G/21-2050-488R -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Rear 4.88 Ratio Ring and Pinion – 1-2152-488
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Rear 4.88 Ratio Ring and Pinion – 1-2152-488
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.88 ratio ring and pinion, part number G/21-2152-488
- Forged 8620 steel gears for performance loads
- Lapped surfaces and tight machining tolerances
SKU: G/21-2152-488 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Rear 4.56 Ring and Pinion – 1-2152-456
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Rear 4.56 Ring and Pinion – 1-2152-456
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.56 ratio ring and pinion, part number G/21-2152-456
- Forged 8620 steel with precision machining to OE specifications
- Heat treated gears with a lapped mating surface
SKU: G/21-2152-456 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Rear 4.10 Ring and Pinion – 1-2152-410
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Rear 4.10 Ring and Pinion – 1-2152-410
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.10 ratio ring and pinion, part number G/21-2152-410
- Forged 8620 steel gears, precision-machined and heat treated
- Lapped mating surface to limit friction and wear
SKU: G/21-2152-410 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Rear 3.73 Ring and Pinion – 1-2152-373
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Rear 3.73 Ring and Pinion – 1-2152-373
- Based on the product title and description, fits the rear Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 3.73 ratio ring and pinion, part number G/21-2152-373
- Forged 8620 steel gears with a lapped mating surface
- Machined to OE specifications for easier setup
SKU: G/21-2152-373 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Front 5.38 Ring and Pinion – 1-2151-538R
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Front 5.38 Ring and Pinion – 1-2151-538R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 5.38 ratio ring and pinion, part number G/21-2151-538R
- Numerically highest front Dana 44 ratio in this group
- Forged 8620 steel with lapped mating surfaces
SKU: G/21-2151-538R -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Front 5.13 Ring and Pinion – 1-2151-513R
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Front 5.13 Ring and Pinion – 1-2151-513R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 5.13 ratio ring and pinion, part number G/21-2151-513R
- Forged, heat treated and lapped gear surfaces
- Engineered for the loads of performance vehicles
SKU: G/21-2151-513R -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Front 4.88 Ring and Pinion – 1-2151-488R
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Front 4.88 Ring and Pinion – 1-2151-488R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 4.88 ratio ring and pinion, part number G/21-2151-488R
- Machined to OE specifications for a quiet, consistent mesh
- Heat treated 8620 steel gears
SKU: G/21-2151-488R -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 44 Front 3.73 Ring and Pinion – 1-2151-373R
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 44 Front 3.73 Ring and Pinion – 1-2151-373R
- Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
- 3.73 ratio ring and pinion, part number G/21-2151-373R
- Forged 8620 steel, precision-machined to OE specifications
- Lapped mating surface for quieter running
SKU: G/21-2151-373R -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 35 Rear 5.13 Ring and Pinion – 1-2149-513
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 35 Rear 5.13 Ring and Pinion – 1-2149-513
- Based on the product title and description, fits the rear Dana 35 axle of 2018–2026 Jeep Wrangler JL models
- 5.13 ratio ring and pinion, part number G/21-2149-513
- Numerically higher ratio for more low-speed torque
- Forged, heat treated and lapped gear surfaces
SKU: G/21-2149-513 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 35 Rear 4.88 Ring and Pinion – 1-2149-488
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 35 Rear 4.88 Ring and Pinion – 1-2149-488
- Based on the product title and description, fits the rear Dana 35 axle of 2018–2026 Jeep Wrangler JL models
- 4.88 ratio ring and pinion, part number G/21-2149-488
- Forged 8620 steel gears, precision-machined and heat treated
- Quiet running at OE noise levels, per the maker
SKU: G/21-2149-488 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 35 Rear 4.56 Ring and Pinion – 1-2149-456
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 35 Rear 4.56 Ring and Pinion – 1-2149-456
- Based on the product title and description, fits the rear Dana 35 axle of 2018–2026 Jeep Wrangler JL models
- 4.56 ratio ring and pinion, part number G/21-2149-456
- Forged 8620 steel with tight machining tolerances for easier setup
- Lapped mating surface reduces friction and wear
SKU: G/21-2149-456 -
Drivetrain & Differential, Performance Axle Components, Ring and Pinions
G2 Axle and Gear JL Dana 35 Rear 4.10 Ring and Pinion – 1-2149-410
Drivetrain & Differential, Performance Axle Components, Ring and PinionsG2 Axle and Gear JL Dana 35 Rear 4.10 Ring and Pinion – 1-2149-410
- Fits the rear Dana 35 AdvanTEK axle of 2018–2026 Jeep Wrangler JL models
- 4.10 ratio ring and pinion, part number G/21-2149-410
- Forged 8620 steel, precision-machined to OE specifications
- Heat treated and lapped for a smoother gear surface
SKU: G/21-2149-410 -
Differential Covers, Drivetrain & Differential, Performance Axle Components
G2 Axle & Gear Hammer M186/Dana 30 Advantek Front Differential Cover (Gray) – 40-2150G
Differential Covers, Drivetrain & Differential, Performance Axle ComponentsG2 Axle & Gear Hammer M186/Dana 30 Advantek Front Differential Cover (Gray) – 40-2150G
- Front M186 or Dana 30 Advantek cover for Jeep JL Wrangler and JT Gladiator
- Gray nodular iron, 7/16 to 1/2 inch thick
- Ramped profile with pockets that guard the bolt heads
- Extra oil capacity
SKU: G/240-2150G -
Drivetrain & Differential, Performance Axle Components, Ring and Pinion Installation Kits
Eaton Dana 35/M200 Rear Master Install Kit – K-D35-200
Drivetrain & Differential, Performance Axle Components, Ring and Pinion Installation KitsEaton Dana 35/M200 Rear Master Install Kit – K-D35-200
- Rear master install kit for Dana 35 differential
- Includes premium bearings
- Covers the parts needed to install an Eaton differential or replace the ring and pinion
- Part number K-D35-200
SKU: EATK-D35-200 -
Complete Axle Assemblies, Complete Axles & Third Members, Drivetrain & Differential
Dana Spicer Jeep JL/JT Ultimate Dana 60 Front Axle Assembly 5.38 Ratio – 10056030
Complete Axle Assemblies, Complete Axles & Third Members, Drivetrain & DifferentialDana Spicer Jeep JL/JT Ultimate Dana 60 Front Axle Assembly 5.38 Ratio – 10056030
- Ultimate Dana 60 front axle assembly with a 5.38 ratio and an Eaton E-Locker
- Disc brake upgrade with an 8 on 6.5 inch wheel bolt pattern
- 35 spline axle shafts for the front of the Jeep Wrangler JL and Gladiator
- Fits 2018–2026 Jeep Wrangler JL and 2020–2026 Jeep Gladiator.
SKU: D/S10056030 -
Complete Axle Assemblies, Complete Axles & Third Members, Drivetrain & Differential
Dana Spicer Jeep JL Ultimate Dana 60 Rear Axle Assembly 5.38 Ratio – 10088918
Complete Axle Assemblies, Complete Axles & Third Members, Drivetrain & DifferentialDana Spicer Jeep JL Ultimate Dana 60 Rear Axle Assembly 5.38 Ratio – 10088918
- Ultimate Dana 60 rear axle assembly with a 5.38 ratio and an ARB Air Locker
- Disc brake upgrade with an 8 on 6.5 inch wheel bolt pattern
- 35 spline axle shafts for the Jeep Wrangler JL
- Fits 2018–2026 Jeep Wrangler JL, 2-door and 4-door.
SKU: D/S10088918 -
Drivetrain & Differential, Locking Hub Spindle Nuts, Performance Axle Components
Dana Spicer Front Axle Nut – 2008564
Drivetrain & Differential, Locking Hub Spindle Nuts, Performance Axle ComponentsDana Spicer Front Axle Nut – 2008564
- Single front axle nut for Dana 30 and Dana 44 axles
- M24 x 2 thread, hex head 1.378 inch
- Thickness 0.770 inch
- Fits 2007–2018 Jeep Wrangler JK and 2018–2026 Wrangler JL.
- Part number 2008564
SKU: D/S2008564