Select your vehicle
-13%

G2 Axle and Gear JL Dana 44 Front 3.73 Ring and Pinion – 1-2151-373R

G2 Axle and Gear

$43.41In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 2:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Based on the product title and description, fits the front Dana 44 axle of 2018–2026 Jeep Wrangler JL models
  • 3.73 ratio ring and pinion, part number G/21-2151-373R
  • Forged 8620 steel, precision-machined to OE specifications
  • Lapped mating surface for quieter running

Description

Overview

The G2 Axle and Gear 3.73 ring and pinion, part G/21-2151-373R, is a front Dana 44 AdvanTEK gear set. The product title and description place it in 2018–2026 Jeep Wrangler JL models.

The 3.73 is the numerically lowest ratio of the front Dana 44 sets in this group. It keeps engine speed lower at highway speed, at the cost of less low-speed torque multiplication.

The front Dana 44 sits at the steering end of the driveline, and its ring and pinion has to match the front carrier and housing exactly. Confirm the axle location and type on your vehicle before the gears are ordered.

Key features

  • Forged from 8620 steel for a strong base
  • Precision-machined to OE specifications using tight tolerances
  • Heat treated for durability in daily-driven use
  • Lapped mating surface for a smoother finish
  • Engineered for the increased loads of performance vehicles

Front gearing and steering loads

The front axle carries steering and drive loads, so its gearing shapes how the vehicle pulls away and cruises at the same time. A numerically low ratio like 3.73 suits long highway runs and keeps engine speed calm at speed. Low-speed pulling power is reduced, which matters more on steep or rocky ground.

Front gears must match the carrier exactly, and the differential side of the job needs the same care as the rear. Setting pinion depth, preload and backlash is normally a professional task. Check the front driveline for play at the hubs and CV joints during any gear work, since worn parts can mask or mimic gear noise.

  • Confirm carrier type before ordering
  • Inspect front axle seals at each service
  • Replace worn hub bearings during the gear change

Specifications

Brand G2 Axle and Gear
Part number G/21-2151-373R
Axle location Front
Axle type Dana 44 AdvanTEK
Gear ratio 3.73
Material 8620 steel, forged
Surface Lapped mating surface

Vehicle fitment

Based on the product title and description, this front Dana 44 set is for 2018–2026 Jeep Wrangler JL models.

Other Wrangler years, such as the 2007–2018 JK, are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Front gear sets are usually set up by a professional. Pinion depth and backlash must be checked, and carrier preload set, before the front axle returns to use.

What’s included

One 3.73 ring and pinion gear set for the front Dana 44 axle.

Not included: the bearings, shims, crush sleeve and seals required to install the set.

Fitment

VehicleYearsTrims
Jeep Wrangler (JL) likely fits2018–2026All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the G2 3.73 front Dana 44 set fit a 2018–2026 Jeep Wrangler JL?

Yes, it is made for the front Dana 44 AdvanTEK axle on 2018–2026 Jeep Wrangler JL models. Confirm your year, model and trim before ordering, particularly for 2007–2018 Wranglers.

Is a 3.73 ratio taller than a 4.88?

Yes. A 3.73 is numerically lower, so the engine turns more slowly at highway speed than with a 4.88, but the gears multiply less torque at low speed, which is the trade-off to weigh for your driving.

Are these front gears forged?

Yes. The G2 3.73 gears are forged from 8620 steel, precision-machined to OE specifications, heat treated and lapped on the mating surface for a smoother finish.

Can front and rear gear ratios be mixed?

Front and rear ratios should generally match, so the transfer case and driveline do not work against each other. Mismatched gearing can cause driveline binding or extra wear. Check the full setup before changing one end of the vehicle.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon