Overview
The Trimax Locks SP125 is a standard 1/2 in receiver pin for Class I and II receiver hitches. It is a non-locking pin made from hardened steel with a triple plated chrome finish.
Choosing a receiver pin
A receiver pin secures a hitch accessory inside the receiver tube and carries the load when the accessory is attached. A standard pin like this one is a simple fastener, so its job is to hold the hitch in place while the vehicle is driven. The pin diameter has to match the hole in both the receiver and the accessory, and the receiver class sets the size of the tube the pin passes through.
Pins are often replaced together with the clip or retainer that holds them in place, since a worn clip can let a pin work loose. Look for bends, flat spots or corrosion on the shank after a season of road salt or trail use. Replace a pin that shows any deformation rather than straightening it.
- Measure the receiver opening before ordering
- Keep the retaining clip in good condition
- Wipe off grit and salt to slow corrosion
Specifications
| Brand | Trimax Locks |
|---|---|
| Part number | SP125 |
| UPC | 70000193567 |
| Pin diameter | 1/2 in |
| Receiver class | Class I and II |
| Material | Hardened steel |
| Finish | Triple plated chrome |
| Locking | Non-locking |
Vehicle fitment
It is universal fit, and the 1/2 in pin is made for Class I and II receivers, so receiver class decides fit.
Confirm your vehicle’s year, model and trim before ordering.









