Select your vehicle

TeraFlex JK 3 Inch Lift Suspension System with 4 Sport Flexarms and Track Bar – 1156224

TeraFlex

$1,626.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 11:30 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • TeraFlex JK 3 inch lift suspension system with four Sport Flexarms and a track bar, part number TER1156224
  • Rear coil springs; no shocks listed
  • Lift height range of 0 to 3.5 in.
  • Fits 2007 to 2018 Jeep Wrangler JK Unlimited four-door

Description

Overview

The TeraFlex JK 3 Inch Lift Suspension System, part number TER1156224, is a suspension kit for the four-door Jeep Wrangler JK Unlimited. It provides a 3 inch lift with a lift height range of 0 to 3.5 inches. The kit includes four preset Sport Flexarms, with front lower and rear upper arms, and a track bar.

The kit is engineered for drivability, with suspension geometry, roll center and load tuning set so the factory stability controls keep working within the limits Jeep set for the vehicle.

The rear uses coil springs, and no shocks are part of the kit. The Sport Flexarms locate the axles and control wheel movement, with front lower and rear upper positions in the kit.

Key features

  • Four preset Sport Flexarms
  • Front lower and rear upper Sport Flexarm positions
  • Track bar included
  • Rear coil springs
  • Lift height range of 0 to 3.5 in.
  • Fits 2007 to 2018 Wrangler JK Unlimited four-door models

Choosing a flexarm setup

Flexarms locate the axle and control how it moves, so the arm positions and bushings affect ride and steering. A kit with four arms gives you control at each corner, but the arms only work well when the axle is set in the correct position.

Coil springs and arms work as a pair. Once the arms change the ride height, the coil springs and shock length should be checked to make sure the suspension can still reach its full travel. Keep the old parts’ bushings in mind as well, since worn bushings can make the new arms feel loose.

After any arm change, have the driveline angles and alignment checked. Look for uneven tire wear, a wandering feel, or clunks over bumps, and address them before they become a larger repair.

  • Check the arm bushings for wear
  • Confirm the axle position after the arms are set
  • Recheck the driveline angles after the install

Specifications

Brand TeraFlex
Part number TER1156224
Lift 3 in. (title)
Lift height range 0 to 3.5 in.
Arms Four Sport Flexarms
Rear springs Coil springs
Shocks None listed
Fit Direct fit

Vehicle fitment

The kit fits 2007 to 2018 Jeep Wrangler (JK) Unlimited four-door models, including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.

Two-door Wrangler JK, TJ and JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Have the driveline angles and alignment checked before driving the Jeep far. Plan the install time around that check.

What’s included

The 3 inch lift suspension system with four Sport Flexarms and the track bar. No shocks are included.

SKU: TER1156224 Categories: ,

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–2018Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the TeraFlex TER1156224 fit a 2016 Jeep Wrangler Unlimited?

Yes. It fits 2007 to 2018 Wrangler JK Unlimited four-door models, so a 2016 Unlimited falls inside those years. Two-door models are not covered.

Does the kit include shocks?

No. Shocks are not part of this kit, so choose front and rear shocks that suit the new height and travel. Confirm the parts you need before ordering.

What lift height is the kit for?

The kit is a 3 inch lift with a lift height range of 0 to 3.5 inches. Confirm that your setup falls within that range before ordering.

Why does alignment matter after a control arm change?

Control arms set the axle position and caster, so changing them moves the alignment. Have it checked after installation, and again after any track bar or spring change, to keep tire wear even.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon