Overview
The Smittybilt Adjust-A-Mount Defender Rack Mounting Kit, part AM-6, is a roof bracket system for the 2006-2014 Toyota Tundra Crew Cab. It attaches the Smittybilt Defender roof rack to a roof that has no rain gutter or other flat mounting point.
The bracket uses rubber expansion nuts to fix a pivoting base plate to the roof, and the upper bracket carries the Defender rack. The mount requires drilling the roof and should be treated as a permanent installation.
Key features
- Designed for vehicles without a rain gutter or flat roof mount
- Pivoting base plate bracket
- Rubber expansion nuts secure the base plate
- Works with the Smittybilt Defender roof rack
Preparing the roof for drilling
A drilled roof mount is permanent, so careful measuring matters more than speed. Mark each hole location from the base plate, then check the spot from inside the vehicle for headliner supports, wiring and roof bows before any drilling begins.
Use the correct bit and drill slowly to limit burrs. Clean the holes and apply a sealant designed for exterior roofs to prevent water from reaching the fasteners. Water that enters through the roof can stain the headliner and corrode the expansion nuts over time.
Once the mount is installed, check the base plate pivot and fasteners after the first few trips. Look for cracks in the roof paint around the holes, which can show that the mount is working loose.
- Confirm hole spacing and clearance inside the roof before drilling
- Use a sealant suited to exterior roofs
- Recheck fasteners after the first few trips
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | AM-6 |
| UPC | 631410114713 |
| Type | Roof rack mounting kit |
| Mounting | Rubber expansion nuts, pivoting base plate |
| Drilling | Required in the vehicle roof |
| Fitment | Direct fit |
Vehicle fitment
The kit is made for the 2006-2014 Toyota Tundra Crew Cab. Check that your vehicle matches that year, model and cab before buying.
Other Tundra body styles and other Toyota trucks are not covered by this fit. A vehicle with a rain gutter may not need this bracket.
Installation notes
This kit requires drilling the roof, so it is a permanent installation. Plan the hole locations before drilling, because the mount is fixed to the roof with expansion nuts.
What’s included
The kit includes the base plate bracket, the upper bracket and the rubber expansion nuts. The Defender rack itself is sold separately.









