Overview
The Skyjacker G452RKMLT is a 4.5 in. dual rate long travel suspension lift for the 2020–2026 Jeep Gladiator Rubicon. Its 3 in. rear coils pair with M95 monotube shocks at the front and rear, and the listed lift height range is 4 to 5.5 inches.
The M95 shocks in this system are monotube units for light trucks, Jeeps and SUVs. Dual rate coil springs provide a soft first stage for highway driving and a firmer second stage for heavy articulation. The second stage engages only after the first stage has compressed, and the rear coils on the Gladiator are variable rate to help control loads for overlanding and towing.
Key features
- 4.5 in. long travel suspension lift
- Dual rate coil springs
- 3 in. rear coil springs
- Left and right coil springs for both sides of the vehicle
- M95 monotube front and rear shocks, length-fitted for full extension
- Variable rate second stage on the rear coils
Monotube Shocks and Load Control
A monotube shock uses a single tube with a floating piston, which helps it dissipate heat more evenly than a twin tube design. On a truck that is run hard off road, that can mean more consistent damping over a long day. Monotube units also tend to hold a steady feel when the suspension is working through repeated bumps.
When a lift changes the ride height, the shock length and mounting points need to suit the new position. Check the shock eyes and mounts after installation, and look for rubbing on the brake lines, sway bar links and tires at full droop. Rear loads from camping gear or a trailer hitch change how the coils and shocks work together, so keep the rear load in mind when setting up the system.
- Check shock eyes and mounts after installation
- Look for rubbing at full droop and full compression
- Consider rear load when setting pre-load and ride height
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYG452RKMLT |
| Kit type | Suspension lift kit, 4 to 4.5 in. |
| Lift height range | 4 to 5.5 inch |
| Rear coil spring | 3 in. |
| Front shocks | M95 monotube |
| Rear shocks | M95 monotube |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator Rubicon.
The list covers only the Rubicon, so the Overland, Sport and Sport S versions and the Wrangler JL are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a 4 to 5.5 inch range, the system changes ride height and driveline geometry. Measure the driveline angles and check the alignment once the system is installed.
Skyjacker length-fits the long travel M95 monotube shocks so they give the maximum extension for full articulation. The shocks supplied with this system are matched to it, so keep the set together during installation and when comparing ride height before and after the lift.
The Rubicon versions of the Gladiator are listed here, so owners of other Gladiator trims should check the list before ordering.
What’s included
The system includes M95 monotube front and rear shocks and the 3 in. rear coil springs. No front spring is included in the kit.









