Overview
The Skyjacker C104KEH-H is a 2 in. suspension lift kit with shock for the 2006–2010 Hummer H3. The kit pairs the lift with hydro shocks, so the ride height and shock setup are designed as one package.
The kit is a direct fit for the H3 trims named in the fitment section below. Other parts are required to finish the job, so plan for those before starting the installation.
Key features
- 2 in. lift height
- Hydro shocks in the kit
- Suspension lift kit with shock
- Direct fit listing for the 2006–2010 Hummer H3
- Limited lifetime warranty from Skyjacker
Shock and ride height balance
Hydro shocks are sized to work with the new ride height, so their damping and travel matter as much as the springs. When a lift changes the suspension angle, the shocks may sit at a different position than the originals did, which is why matching shock length to the lift is important. Check that the shock mounts and bushings sit square before the first drive, and confirm the shocks have full range of motion.
Other parts commonly replaced during a lift include sway bar links, brake lines and bump stops. Inspect the control arm bushings and ball joints while the wheels are off, since worn joints can make a lifted truck feel loose on the road. After the first week of driving, re-check fasteners and look for uneven tire wear that would point to an alignment issue.
- Inspect shock mounts and bushings before the first drive
- Check brake line length after a lift
- Replace worn sway bar end links during the install
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | C104KEH-H |
| UPC | 700007057781 |
| Lift height | 2 in. |
| Shock type | Hydro shock |
| Warranty | Limited lifetime |
Vehicle fitment
The fitment covers the 2006–2010 Hummer H3 in Alpha, Base, Championship Series and X trims.
Other Hummer models and years are not covered by this list. Compare your H3’s year and trim with the list above before installing.
Installation notes
Lifting the front and rear changes driveline angles and wheel alignment, so have the alignment checked and the driveline angles measured once the kit is in. Have the other required components on hand before you begin.
What’s included
The kit comes with the lift components and the shock. Not included: Other Hummer models and years are not covered. Compare your H3’s year and trim with the entries above before installing.









