Overview
The Skyjacker JL25RBPMLT is a 2 to 2.5 inch dual rate long travel coil spring lift for the 2018 Jeep Wrangler JL Unlimited Rubicon. It is the M95 shock version of the JL25RBPBLT and uses the same coils, end links and bump stop extensions. It fits the Unlimited Rubicon.
The spec sheet gives a maximum tire size of 38 x 13.50 for street articulation and 37 inches for full off-road articulation, with a recommended 9 inch wheel at zero offset. The kit is sold with a limited lifetime warranty per the manufacturer.
Dual rate coils give the JL a first rate for highway comfort and a second rate that engages after compression passes the first. The second rate helps keep control steady during body roll and heavy off-road suspension movement. The M95 long travel shocks are length fitted for full articulation, and the extended sway bar end links support full droop while the bump stop extensions clear the tires at bump.
Key features
- Dual rate long travel coil springs front and rear
- Four M95 long travel shock absorbers included
- Front extended sway bar end links
- Front and rear bump stop extensions
- Grade 8 mounting hardware
Maintaining long travel shocks
Long travel shocks work hard at both ends of their range. Their seals, rod ends and mounting bushings see more movement than a shorter shock, so routine inspection matters more than with a standard setup. A shock that is leaking or losing damping can change how the suspension handles braking, cornering and off-road compression.
Regular checks are simple. Look for oil on the shock body, feel for play at the mounts and watch for uneven tire wear, which often points to a suspension problem. Keeping the sway bar end links and bump stop extensions in good condition also helps the suspension stay in its intended range.
- Look for fluid on the shock body
- Check mounts and bushings for play
- Inspect sway bar end link ends and boots
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL25RBPMLT |
| UPC | 803696256610 |
| Lift height range | 2 to 2.5 inches |
| Suspension type | Coil spring kit |
| Front shocks | M95 long travel |
| Rear lift method | Coil springs |
| Maximum tire size | 38 x 13.50 street; 37 inch off-road full articulation |
| Recommended wheel | 9 inch, 0 offset |
Vehicle fitment
It fits the 2018 Jeep Wrangler JL Unlimited Rubicon. It is for 4-door Rubicon models.
Non-Rubicon models use the JL25BPMLT and are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the extended end links and bump stop extensions with the coils, since they set the travel range. Check the brake lines and the front and rear height after install.
What’s included
The kit includes dual rate front and rear coil springs, four M95 long travel shock absorbers, extended front sway bar end links, front and rear bump stop extensions and grade 8 mounting hardware.














