Overview
The Pro Comp 48 Series Quick 8 20×9 wheel, part number PXA5148-295550, is a 20-inch aluminum spoke wheel that is 9 inches wide. It has a 5 on 150 bolt pattern and a satin black milled finish.
This version has a 110 center bore, a 0 offset and a backspacing of 5. The Quick 8 is built with low-pressure casting and rated for 2500 to 3650 lbs per wheel. It is a universal fit wheel with no vehicle named.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 5 on 150 bolt pattern
- Center bore 110
- Offset 0 and backspacing 5
- Satin black milled spoke finish
Hub measurement and load
A five-lug 150 layout places the stud holes farther apart than many common five-lug hubs, so the wheel will not fit a smaller layout. Measure stud to stud across the pattern before buying, and make sure the stud length suits the wheel’s mounting face. Lug nut seats should match the wheel’s lug holes.
Load ratings describe what each wheel can carry, not what the vehicle carries overall. When choosing a wheel, compare the rating with your vehicle’s axle load and the tire’s load index. After heavy use, inspect the wheel face and spokes to spot cracks or bent areas, and replace any wheel that shows damage.
- Measure stud to stud before ordering
- Match the lug nut seat type to the wheel
- Inspect spokes and face after heavy loads
- Confirm the tire load index covers the axle load
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5148-295550 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 110 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Spoke |
| Finish | Satin black milled |
| Construction | Aluminum |
| Series | 48 Series Quick 8 |
Vehicle fitment
No vehicle is named for this 5 on 150 wheel, and the fitment is universal. Check the hub’s bolt pattern and 110 center bore, then confirm the 20-inch size clears the caliper and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5 on 150 layout is not interchangeable with 5 on 5 or 5 on 5.5, so verify the hub before mounting. Check caliper and fender clearance once installed.
The 5 on 150 layout and 110 center bore define the hub fit. The 0 offset keeps the face centered, and the 20-inch, 9-inch wheel needs caliper and tire clearance checked after mounting. Confirm the hub before ordering.
What’s included
One 20×9 wheel in satin black milled. Confirm lug nuts and center caps suit the hub before mounting.











