Overview
ICON Vehicle Dynamics offers this Six Speed Series wheel in Satin Black under part number ICO1417858357SB. It is a 17 by 8.5-inch split-spoke wheel made from aluminum, with a 6 on 5.5 bolt pattern, a 108 center bore, an offset of 25 and a backspacing of 5.8.
The design suits Jeep, truck and SUV owners who want a bold appearance. Caliper room and wheel placement were built around unrestricted suspension travel and steering. Backspace and offset reduce scrub radius, supporting smoother handling and better ride quality.
Key features
- Satin Black split-spoke styling
- Aluminum construction
- Offset 25 with backspacing 5.8
- Caliper clearance named as an engineering aim
- Scrub radius reduction credited to backspace and offset
- Six Speed Series
Checking offset before you mount
Offset is the distance from the wheel’s mounting face to its centerline, and it decides how far the tire sits inward or outward from the hub. A higher positive offset pulls the tire closer to the vehicle, while a lower offset pushes it out. Tire width also matters, because a wider tire on the same offset reaches further toward the fender and caliper.
Split spoke designs leave gaps that show brake calipers and suspension parts from the outside, so compare the inner barrel against those parts rather than relying on the look of the face. Check clearance at full lock and with the suspension compressed. If the wheel rubs, a different offset or a narrower tire may be needed.
- Compare the inner barrel with caliper and suspension parts
- Test clearance at full lock in both directions
- Recheck after changing tire width
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO1417858357SB |
| Series | Six Speed |
| Style | Split spoke |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 25 |
| Backspacing | 5.8 |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
This is a universal fit wheel with no vehicle attached. Hub bore and bolt pattern must match the vehicle, so measure them against the 6 on 5.5 pattern and 108 center bore. The offset of 25 also changes fender spacing, so verify clearance once the hub fit is confirmed.
Clearance depends on offset and tire size as well as the hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before mounting, check that the 108 center bore sits flush on your hub and that the wheel clears your calipers at an offset of 25.
What’s included
The wheel itself, including its finish and dimensions.
Not included: Tires, lug nuts and center caps need separate confirmation.




