Overview
The FUEL Off-Road Maverick D610 is a 20 x 9 inch gloss black milled aluminum spoke wheel with an 8 on 6.5 bolt pattern, part number MHTD61020908250.
The specifications give an offset of 1, a center bore of 125 and a backspacing of 5. Those numbers, plus the 8 on 6.5 pattern, are the ones to check against the hub on your vehicle.
Key features
- 20-inch diameter and 9-inch width
- 8 on 6.5 bolt pattern
- Gloss Black Milled finish
- Spoke style
- Aluminum construction
Matching the hub
Spoke wheels carry their load through the hub face, so the center bore and bolt holes must sit flush against the hub before any torque is applied. When the bore is larger than the hub, a hub-centric ring can fill the gap so the studs do not carry the wheel’s weight. Choose the ring size to match the hub rather than guessing from the wheel alone.
Offset and backspacing decide how the rim sits against brake calipers, control arms and the fender. A wheel that sits farther outward can clear a caliper but may rub a fender once the suspension is raised. Recheck clearance any time tire width or suspension height changes, because both alter the space behind the spokes.
- Clean the hub face and rotor contact surface before mounting
- Tighten lug nuts in a star pattern
- Re-torque after the first drive
- Inspect spoke welds and finish for cracks during tire service
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD61020908250 |
| Style | Spoke |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Offset | 1 |
| Backspacing | 5 |
| Center bore | 125 |
| Bolt pattern | 8 on 6.5 |
| Finish | Gloss Black Milled |
| Construction | Aluminum |
| Universal fit | Universal Fit |
Vehicle fitment
No make, model or year is attached to this wheel. The universal fit statement applies, so the bolt pattern and offset are the measurements to confirm.
Offset 1 places the mounting face close to the centerline, which changes how the wheel sits against brake and suspension parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the center bore to match your hub, and check brake caliper clearance with a backspacing of 5.
What’s included
One wheel, part number MHTD61020908250.
Not included: tire.











