Select your vehicle
-13%

Rubicon Express Gen II Sway Bar Link – RE1185

Rubicon Express

  • Gen II non-disconnect sway bar link, part number RE1185
  • Non-greasable, with the sway bar held in place after a lift
  • Universal fit listed; no vehicle named

Purchase through Amazon

Orders are placed, shipped and supported through Amazon, with Amazon’s checkout, delivery options and return policy.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

Description

Overview

The Rubicon Express RE1185 is a Gen II non-disconnect sway bar link, sold under part number RE1185 with the code R/ERE1185. It holds the sway bar in its proper position once a suspension lift has changed the geometry, which helps the vehicle handle predictably. The link is non-greasable.

Universal fit applies, but no year, make, model or axle is named. The link has to match the lift and the mounting points, so confirm the vehicle before buying.

Key features

  • Gen II design
  • Non-disconnect type
  • Non-greasable service
  • Holds the sway bar in position after a lift

Inspection after installation

After a lift, the sway bar sits at a new angle, and the link carries the load that the bar transfers. A non-disconnect link holds the bar in place at all times, so any looseness or bent end shows up in steering and body control. Check the link’s movement through full suspension travel after the first install.

Non-greasable links depend on the bushing and end condition rather than regular lubrication. Look for splits in the rubber, cracks at the mounting points, and bright wear marks where the link rubs. When one link needs replacement, check the other side as well so both sides match in stiffness and angle.

  • Check the link at full suspension travel
  • Look for split or cracked bushings
  • Inspect mounting points for cracks
  • Compare both sides before replacing one

Specifications

Brand Rubicon Express
Part number RE1185
UPC 614901437485
Type Non-disconnect
Service Non-greasable
Fitment listed Universal fit

Vehicle fitment

Universal wording does not confirm a match to a specific vehicle, so check the axle and lift before ordering.

Compare the link with the factory link it replaces before installing. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Set the link in place with the correct orientation and tighten the fasteners to the specified torque. Check the sway bar position and the link’s movement through full suspension travel after the install.

What’s included

The package contains one Gen II sway bar link.

SKU: R/ERE1185 Category:

Specification

Shipping weight 0.80 lbs
Package dimensions 11.10 × 1.50 × 1.40 in
brands

Questions & Answers

Is the RE1185 greasable?

No. The link is non-greasable, so it has no grease fittings. Its bushings are maintained by inspection rather than grease, so check them at regular service intervals.

What is the difference between the RE1185 and the RE1184?

Both are Gen II non-disconnect links with universal fit listed and no vehicle named. They have different part numbers and UPCs, so match the part number to the link you need.

Does the RE1185 fit my vehicle?

No vehicle is named for this link, so a match cannot be confirmed from the part alone. Compare your year, make and model with the lift and mounting points before you order.

How often should a sway bar link be inspected?

Check it whenever the tires are off, after any lift or suspension change, and after rough trail use. Inspection covers the bushings, the ends and the mounting points, since this link is serviced by checking rather than greasing.

Can a sway bar link be bent back into shape?

No, bending is not a good repair. A bent link changes the bar angle and can crack at the stressed area, so replace it rather than straightening it.