Overview
The Rough Country N3 dual steering stabilizer (part number R/C8749530) fits Dodge Ram 2500 trucks from 2003 to 2013 and Ram 3500 trucks from 2003 to 2012. It is a dual kit for trucks with at least 2 inches of suspension lift and does not fit stock-height models.
Rough Country designed the N3 stabilizers to restrain bump steer and front-end vibration, which helps protect tires, ball joints and other steering parts. The kit includes brackets, but the install requires drilling.
Key features
- Dual stabilizer configuration
- Brackets included
- Requires drilling for installation
- Requires 2 inches or more of suspension lift
- Easy bolt-on installation
- Reduces bump steer and tie rod and ball joint wear
Drilling and lift planning
Drilling changes the mount and can leave sharp edges or stress points if it is done quickly. Use a center punch to start each hole, clean the burrs, and check the bracket is square before the final fasteners go in. Work with the front wheels off the ground so the steering can be checked through its full range.
Lift height decides how the stabilizer sits in the steering geometry, so confirm the height on the truck before marking anything. A dual unit adds a second point of control, which helps when tire size or steering wear has grown since the truck was built. Inspect the tie rod ends and ball joints during the install, since worn joints can make a new stabilizer feel loose.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C8749530 |
| Series | N3 |
| Single or dual | Dual |
| Brackets | Included |
| Lift required | 2 in or more of suspension lift |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2003–2010 Dodge Ram 2500 in the Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX and TRX4 trims, the 2003–2010 Dodge Ram 3500, the 2011–2013 Ram 2500 and the 2011–2012 Ram 3500.
The list does not include the 1500 series trucks or any model outside the 2003–2013 Ram 2500 and 2003–2012 Ram 3500 range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required for this kit. Because drilling is required, plan the work before starting and confirm the drill points against your lift height.
What’s included
A dual N3 steering stabilizer kit with brackets. Check the package contents against your installation before starting, including the hardware you will need.











