Select your vehicle

Rough Country N3 Steering Stabilizer – 8732030

Rough Country

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Single N3 complete kit for 1999–2006 Chevrolet, GMC and Suburban pickups and SUVs
  • Needs a Rough Country 4-inch or 6-inch suspension lift
  • Chrome hardened 18mm piston rod
  • Brackets included

Description

Overview

The Rough Country N3 steering stabilizer complete kit (part number R/C8732030) is a single front stabilizer for 1999–2006 Chevrolet Silverado and GMC Sierra pickups and for the 2000–2006 Tahoe, Yukon and Suburban. It fits only pickups from 1999 to 2006 and SUVs from 2000 to 2006 that carry a Rough Country 4-inch or 6-inch suspension lift.

Rough Country designed the N3 to restrain bump steer and front-end vibration, which helps aftermarket tires perform. The kit uses a chrome hardened 18mm piston rod and a large-bodied cylinder, and it installs with common tools in a home garage.

Key features

  • Single front stabilizer complete kit
  • Chrome hardened 18mm piston rod
  • Large-bodied cylinder for damping
  • Brackets included
  • Bolt-on installation with common tools
  • Reduces bump steer and tie rod and ball joint wear

Choosing a single stabilizer

A single front stabilizer damps steering movement on one axle, which suits many pickups and SUVs that run a modest lift. Tire size, lift height and steering wear all change how much control the unit needs, so consider the whole front end rather than the stabilizer alone.

Look for signs the old unit has worn out. Fluid on the cylinder, a bent rod, loose mounts or a wandering steering wheel all point to replacement. Inspect the tie rod ends and ball joints at the same time, and replace worn joints so the new stabilizer is not working against play in the steering.

  • Check the front axle mounts
  • Inspect tie rod ends and ball joints
  • Replace worn joints in the same job

Specifications

Brand Rough Country
Part number R/C8732030
Series N3
Single or dual Single
Position Front
Type Complete kit
Piston rod 18mm chrome hardened
Brackets Included
Lift required Rough Country 4 in or 6 in suspension lift
Fitment Direct fit

Vehicle fitment

It fits the 2002–2006 Chevrolet Avalanche 1500 and 2500, the 1999–2006 Chevrolet Silverado 1500, the 2001–2003 and 2005–2006 Silverado 1500 HD, the 2000–2006 Chevrolet Suburban and Tahoe, the 1999–2006 GMC Sierra 1500, the 2007 Sierra 1500 Classic, the 2001–2003 and 2005–2006 Sierra 1500 HD, and the 2000–2006 GMC Yukon and Yukon XL 1500.

The list does not include the 2007 and later Silverado or Sierra models, or any vehicle without a Rough Country 4 in or 6 in lift. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A complete single N3 stabilizer kit with brackets.

Fitment

VehicleYearsTrims
Chevrolet Avalanche 15002002–2006Base, LS, LT, North Face, WBH, Z71
Chevrolet Avalanche 25002002–2006Base, LS, LT
Chevrolet Silverado 15001999–2006Base, Hybrid, LS, LT, WT, Z71
Chevrolet Silverado 1500 HD2001–2003, 2005–2006Base, LS, LT
Chevrolet Suburban 15002000–2006Base, LS, LT, Z71
Chevrolet Tahoe2000–2006Base, LS, LT, Z71
GMC Sierra 15001999–2006Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT
GMC Sierra 1500 Classic2007Denali, Hybrid, SL, SLE, SLT, WT
GMC Sierra 1500 HD2001–2003, 2005–2006SLE, SLT
GMC Yukon2000–2006Denali, SL, SLE, SLT
GMC Yukon XL 15002000–2006Denali, SL, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the R/C8732030 fit a 2008 Chevrolet Silverado 1500?

No. It fits 1999–2006 Silverado 1500 models and the 2001–2003 and 2005–2006 Silverado 1500 HD trucks, and later model years are not covered. Check the year, model and trim against your truck before ordering.

Does this stabilizer require a lift kit?

Yes. It fits only models with a Rough Country 4-inch or 6-inch suspension lift. A stock-height vehicle is not covered, and the 1999–2006 pickups and 2000–2006 SUVs are the vehicles it fits.

Are brackets included?

Yes. The complete kit includes brackets, so separate mounts are not needed. The shock boot is not included, so review the package contents against your installation before starting the job.

Is a single stabilizer enough for a lifted full-size pickup?

A single front stabilizer addresses steering oscillation on the front axle, which is where bump steer shows up. Whether one unit is enough depends on tire size, lift height and steering wear. Inspect the tie rod ends and ball joints as well, since worn joints can let the wheel move even when the stabilizer is working.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon