Overview
The Rough Country GM N3 steering stabilizer (part number R/C8738630) is a single front stabilizer for 1988–1999 Chevrolet and GMC C1500 and C2500 pickups, the 1992–1999 Suburban, the 1995–1999 Chevrolet Tahoe and the 1992–1999 GMC Yukon. It is built to restrain bump steer and front-end vibration on trucks running aftermarket tires.
The N3 is a 100% bolt-on kit that can be installed at home with common tools, without removing the tires or wheels. The chrome hardened 18mm piston rod and large cylinder dampen vibration on the trail.
Key features
- Single front stabilizer for GM trucks and SUVs
- Chrome hardened 18mm piston rod
- Large-bodied cylinder for vibration damping
- Bolt-on installation with common tools
- Reduces bump steer and tie rod and ball joint wear
Bracket layout and mounting
Mounting brackets for a steering stabilizer have to match the axle and frame layout of the specific truck. Because the brackets are not part of this kit, the install starts with choosing or fabricating a mount that puts the stabilizer in line with the steering linkage. Bump steer depends heavily on tie rod height, so the geometry should be checked after the stabilizer is in place.
Mount alignment matters as much as the stabilizer itself. A bent bracket or a stabilizer that sits at an angle can bind through full travel. Inspect the bracket welds or bolts, look for rust on the frame, and confirm clearance around the tire at full lock before driving the truck.
- Confirm the bracket matches your axle and frame
- Check tie rod height and steering geometry after install
- Look for rust or bending on the frame mount
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C8738630 |
| Series | N3 |
| Single or dual | Single |
| Position | Front |
| Piston rod | 18mm chrome hardened |
| Brackets | Not included |
| Shock boot | Not included |
| Fitment | Direct fit |
Vehicle fitment
It fits 1988–1998 Chevrolet C1500 and C2500, 1992–1999 Chevrolet C1500 and C2500 Suburban, 1989 Chevrolet R2500, 1995–1999 Chevrolet Tahoe, 1988–1998 GMC C1500 and C2500, 1992–1999 GMC C1500 and C2500 Suburban, 1988–1989 GMC R2500 and 1992–1999 GMC Yukon. Verify your truck’s year, model and trim before you buy.
The list does not include the 2000–2006 Silverado and Sierra, the Avalanche or the Suburban 2000 and later. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets are not included, so the mounting brackets for your truck must be sourced separately. Check the bracket layout for your model before starting the install.
What’s included
Not included: brackets and the shock boot. The stabilizer itself is the product.










