Overview
The Rough Country N3 dual steering stabilizer complete kit (part number R/C87304) is built for Jeep Wrangler JL, Wrangler JK and Gladiator trucks that have 2.5 inches or more of suspension lift. The stabilizers are meant to restrain bump steer and front-end vibration when running larger tires and wheels.
The kit uses a chrome hardened 18mm piston rod and a large-diameter body. It bolts on without removing the tires or wheels and can be installed in a home garage with common tools. A 3-year warranty applies to the kit. Lift height and axle tube size both affect fit, so check them against your truck before ordering. The stabilizers and their brackets are installed together as one set.
Key features
- Dual stabilizer complete kit with brackets
- Chrome hardened 18mm piston rod
- Large-diameter body for vibration damping
- Bolt-on installation with no need to remove tires or wheels
- Improves control and handling
- Reduces bump steer and tie rod and ball joint wear
- 3-year warranty
Before you install
A dual stabilizer setup places two damping units across the front axle, which is useful when a lift has moved the steering off stock geometry. The two sides need to work together, so the brackets and rod ends should be square and free of binding before the tires are set down.
Plan the job around the axle and steering geometry. Mark the mount locations carefully, check clearance around the axle tube and tie rod, and confirm the stabilizers can move through full steering lock. After the first few drives, recheck the brackets and bolts, since a shifting mount can rub or bind.
- Check clearance at full steering lock
- Recheck bolts after the first drives
- Inspect rod ends at each service
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C87304 |
| Series | N3 |
| Single or dual | Dual |
| Type | Complete kit |
| Piston rod | 18mm chrome hardened |
| Brackets | Included |
| Shock boot | Not included |
| Lift required | 2.5 in or more of suspension lift |
| Warranty | 3 years |
| Fitment | Direct fit |
Vehicle fitment
It is for the 2020–2026 Jeep Gladiator, the 2018 Jeep Wrangler (JK) Rubicon, Sahara and Sport trims in 2-door and Unlimited form, and the 2018–2026 Jeep Wrangler (JL) in its 2-door and Unlimited trims.
The list does not include the 2007–2017 Wrangler JK or any Jeep TJ, LJ or YJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit needs a lifted suspension and does not fit a stock-height Jeep. It is not compatible with aftermarket axles that have a 3-inch diameter tube. Check the axle tube size and lift height before ordering. Brackets come with the kit, so no separate mounts are needed.
What’s included
A complete dual steering stabilizer kit with brackets. The shock boot is not included.












