Overview
The Rough Country 363 is a 2.5-inch suspension leveling kit for Dodge and Ram 1500 4WD trucks. It raises the front to match the rear, which removes the factory rake and gives a more aggressive look. The kit is for 4WD models only. It fits the 2012–2018 Ram 1500 trucks and the 2019–2024 Ram 1500 Classic.
The kit keeps the factory coil spring in use and maintains factory ride quality. It is an easy-to-install solution, and the spacer kit provides enough ride height to run up to 33×12.50 tires. It suits owners who want a level front on a 4WD Ram without replacing the factory coil springs.
Key features
- Re-uses the factory coil spring
- Two strut preload spacers and two strut shims
- A36 steel construction
- Corrosion resistant black powder coat
- Bolt-on installation with the strut disassembled
Choosing the right setup
Spacer kits suit owners who want a level front without changing the coil springs. Because the factory spring stays in use, the rest of the suspension keeps its original job. Think about the tires you plan to run, since a taller tire changes speedometer reading, rubbing points and steering effort at full lock.
Front height can change the angles of the front suspension, so an alignment after the install is a sensible step. Inspect the front shocks and bushings at the same time, and look for worn tires that show uneven wear on the inside or outside edges. Aftermarket bump stops and brake hose length are also worth checking on a raised front end.
- Check tire clearance at full lock and full compression
- Recheck the strut hardware after the first trail run
- Inspect the front shocks for leaks before the install
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C363 |
| Suspension type | Leveling kit |
| Material | A36 steel |
| Finish | Black powder coat |
| Tire size | Up to 33×12.50 |
| Rear lift method | Block or spacer |
| Shocks included | No |
| Front shocks | None |
| Rear shocks | None |
Vehicle fitment
The kit fits the 2012–2018 Ram 1500 in its Big Horn, Express, Laramie, Limited, Lone Star, Outdoorsman, Rebel, SLT, ST, Sport and Tradesman trims. It also fits the 2019–2024 Ram 1500 Classic in its Big Horn, Express, Lone Star, SLT, Tradesman and Warlock trims.
The kit does not fit TRX models or trucks with factory air ride suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Disassemble the strut to install the spacer kit. It mounts on the front end only, and the factory springs stay in place, so no new springs are needed.
What’s included
Two strut preload spacers and two strut shims, all made of A36 steel with a black powder coat.












