Overview
The Rough Country 2″ Ford Leveling Lift Kit (No Shocks), part number R/C52201, provides 2 inches of front lift for the 2009–2020 Ford F-150. It is a bolt-on front leveling set with no shock absorbers, and it does not fit Raptor models.
The strut extensions are made from a heavy-duty composite that Rough Country says will not rust. The kit includes a set of rear blocks and hardware, and it carries Rough Country’s Lifetime Replacement Guarantee.
Key features
- Front strut extensions for 2 inches of front lift
- Heavy-duty composite construction
- Driver and passenger side pattern for upper control arm clearance
- No need to disassemble the factory struts
- Maintains factory ride quality
- Rear blocks included
Before you install
Front leveling kits change the geometry of the front suspension, so the job affects more than ride height. Raising the front by two inches changes the angle of the upper control arms and the driveline, which is why an alignment check belongs at the end of any leveling job. Plan to inspect the front ball joints, tie rod ends and sway bar links while the front is open, since a higher ride height can put added load on parts that are already worn.
Strut extension kits work best when the rest of the front end is in good shape. Worn shocks, bushings and springs can make a leveled truck handle poorly even when the lift itself is installed correctly. Check the tires for uneven wear after the first few drives and recheck the U-bolts on the rear blocks after the first trail or highway run.
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C52201 |
| Front lift | 2 inches |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks and U-bolts |
| Finish | Black |
| Shock absorbers | Not included |
| Maximum tire size | 33 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2009–2020 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, Police Responder, SSV, STX, XL and XLT models.
The Raptor is not covered by this kit, and the 2021 and newer F-150 are not covered either. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because no shocks are included, check the length of the existing shocks against the new ride height before installing the strut extensions.
Because this set is listed with no shocks, the existing shock absorbers are reused. Measure the current shock length and mounting points against the 2-inch lift before installing the strut extensions, and have the front alignment set when the job is complete.
The kit uses hardware and a set of rear blocks, so plan for the rear side to be lifted along with the front. Confirm the rear blocks sit flat before tightening the U-bolts.
The front extensions are made of heavy-duty composite, and the design lets the truck sit level without strut disassembly. The front rides at the same height as the rear without changing the factory ride.
What’s included
Front strut extensions, hardware and a set of rear blocks.
Not included: shock absorbers.









