Overview
The Raceline Wheels Shift BMF is a 17-inch by 8.5-inch aluminum wheel in satin black machined with dark tint, part number RLW930DM-7859618. It is drilled for a dual bolt pattern of 5 on 4.5 and 5 on 5, so one wheel covers two common five-lug hub layouts.
Raceline describes its consumer wheels as carrying over the performance engineering it developed for off-road racing. The Shift BMF is offered as a universal fit wheel, so no specific year, make or model is named; the bolt pattern, offset and backspacing decide whether it suits a given hub.
Key features
- 17-inch diameter with 8.5-inch width
- Dual five-lug bolt pattern: 5 on 4.5 and 5 on 5
- Offset of 18 with 5.46 backspacing
- Satin black machined face with dark tint
- Aluminum construction
- Shift BMF style from Raceline
Choosing a five-lug fit
Five-lug hubs come in several spacings, so a wheel drilled for two patterns gives some flexibility, but only when the spacing on the hub matches one of those patterns exactly. Measure from the center of one stud across to the far stud, or use a bolt pattern gauge, and compare the result before ordering. Guessing from the lug count alone is a common cause of wheels that will not mount.
Offset and backspacing shape how the wheel sits inside the wheel well. A larger wheel diameter and width can change tire height and rolling clearance, so check the tire you plan to run against fenders and suspension travel. Lug seat style also matters: the nut must seat fully on the wheel, and a mismatched seat can loosen over time.
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW930DM-7859618 |
| Style | Shift BMF |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 4.5 and 5 on 5 |
| Offset | 18 |
| Backspacing | 5.46 |
| Finish | Satin Black Machined with Dark Tint |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
This wheel is marked universal fit, so it is not tied to a particular year, make or model. It is drilled for both 5 on 4.5 and 5 on 5 hubs, so match one of those patterns to your hub first, then check offset and backspacing against brake caliper and suspension clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An offset of 18 and backspacing of 5.46 set where the wheel face and inner barrel sit, so check fender, caliper and suspension clearance before mounting. Use the lug nut seat type your hub requires.
What’s included
One wheel is supplied. Not included: Lug nuts, center caps and valve stems can be sourced separately if your installation calls for them.









