Overview
The Raceline Wheels 946B Boost is a 17 inch by 9 inch aluminum spoke wheel in satin black, part number RLW946B-79081-12. It sits in the 946 Boost series with an 8 on 170 bolt pattern, and the brand tags it Universal Fit rather than naming a vehicle.
Raceline Wheels describes its consumer wheel line as built on the same performance technology used in its off-road racing wheels. For fitment, compare offset -12, center bore 131 and backspacing 4.5 against your own hub and clearance.
Key features
- 17 inch diameter and 9 inch width
- Aluminum spoke style
- Satin black finish
- Bolt pattern 8 on 170
- Offset -12, backspacing 4.5 and center bore 131
- Part of the 946 Boost series
Wheel offset and clearance
Offset and backspacing decide where a wheel sits relative to the hub, the fender and the suspension. A wheel with a negative offset pushes its face outward, which can change tire-to-fender clearance and steering-arm clearance. Backspacing shows how far the mounting face sits from the inner lip, so it is the number to check against brake calipers and the inside of the wheel.
Aluminum spoke wheels are often chosen for appearance and reduced weight, but the spoke design also affects how brake dust and debris clear. Clean the back of the wheel during regular service. Tire choice matters too: a tire of the wrong overall diameter changes speedometer reading and can rub at full lock.
- Check brake caliper clearance before mounting
- Use a tire with the correct overall diameter
- Recheck lug torque after the first drives
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW946B-79081-12 |
| Series | 946 Boost |
| Wheel diameter | 17 Inches |
| Wheel width | 9 Inches |
| Offset | -12 |
| Center bore | 131 |
| Backspacing | 4.5 |
| Bolt pattern | 8 on 170 |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin Black |
| Fitment label | Universal Fit |
Vehicle fitment
Matching the 8 on 170 bolt pattern and center bore 131 to your hub comes first, then confirm suspension and brake clearance for the -12 offset.
A matching bolt pattern and center bore do not confirm clearance for offset -12 on every vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub bolt pattern and center bore before ordering. A negative offset of -12 moves the mounting face outward, so check suspension and brake clearance, and test fit the wheel with a tire mounted before driving.
What’s included
Plan on arranging tires, center caps and lug nuts separately for a complete setup.
Not included: Lug hardware, caps and tires are not part of the wheel itself.









