Overview
The Raceline Wheels Shift BMF 16×8 is a 16-inch aluminum wheel, 8 inches wide, in a satin black machined finish with dark tint, part number RLW930DM-68081-00. It has an 8 on 170 bolt pattern, an offset of 0 and a backspacing of 4.5. It is a universal fit wheel, so fit depends on your hub.
Raceline builds its wheels for performance, drawing on its off-road racing experience. The style is Shift BMF, finished in satin black machined with dark tint.
Key features
- 16 inch diameter and 8 inch width
- Satin black machined finish with dark tint
- 8 on 170 bolt pattern
- Offset of 0 and backspacing of 4.5
- Aluminum construction
- Shift BMF style from Raceline Wheels
Before you mount
Wheel fit comes down to three measurements working together. The bolt pattern must match the hub, the offset sets where the mounting face sits relative to the centerline, and the backspacing sets the room behind the mount. A wheel can share a bolt pattern with a hub and still rub, so the offset and backspacing need to be compared against the brake calipers and suspension parts you already have.
Before mounting, clean the hub face and remove any rust or old debris, since a dirty mating surface can cause the wheel to sit unevenly. Check lug seats and thread condition before tightening. After the first few drives, re-check lug tightness, because new wheels can settle slightly as they seat against the hub. Keep track of the wheel’s position if you rotate the set.
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW930DM-68081-00 |
| Style | Shift BMF |
| Finish | Satin Black Machined with Dark Tint |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Offset | 0 |
| Backspacing | 4.5 |
| Bolt pattern | 8 on 170 |
Vehicle fitment
The wheel is not tied to a named vehicle, so fit depends on your hub. Match the 8 on 170 bolt pattern, offset of 0 and backspacing of 4.5 to your hub before mounting, and confirm the wheel clears your brakes.
Vehicles cannot be named for this wheel, so measure the hub you are replacing and match its bolt pattern, offset and backspacing before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Offset 0 places the mounting face on the wheel’s centerline. Backspacing of 4.5 is the distance from the mounting face to the inner edge, which shows the room behind the mount for calipers and suspension parts. Test-fit before final mounting.
What’s included
Plan for valve stems, center caps and lug hardware separately if your installation needs them.
Not included: tires.









