Overview
The Raceline Wheels Shift 17×9 is a satin black spoke wheel, part number RLW930B-79096-00, measuring 17 inches in diameter and 9 inches wide. It carries a 5 on 4.5 and 5 on 5 bolt pattern, with a second listed pattern of 5 on 4.5/114.3, and it belongs to the 930 Shift series.
Offset is 0, center bore is 78 and backspacing is 5, so the wheel sits centered in the wheel well. Because it is marked universal fit, no year, make or model is named, and the hub measurements are what determine whether it suits a given vehicle.
Key features
- 17-inch diameter and 9-inch width
- Spoke design in satin black
- Two bolt pattern entries: 5 on 4.5 and 5 on 5, plus 5 on 4.5/114.3
- Zero offset and 5 backspacing
- Center bore listed at 78
- Aluminum construction in the 930 Shift series
Center bore and hub fit
The center bore is the hole that fits over the hub’s pilot. When the bore matches the hub closely, the wheel centers itself and the lug studs carry less of the load. When the bore is larger, hub-centric rings can close the gap, and those rings should be chosen to match the bore and hub exactly. Using the wrong ring size can cause vibration that is hard to trace.
Spoke wheels leave more open area to clean, so debris can gather behind the spokes and around the barrel. Inspect the spokes and inner barrel after rough use for bends, cracks or paint chips at the edges. Light damage should be checked by a shop before the wheel is used at speed again.
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW930B-79096-00 |
| Series | 930 Shift |
| Style | Spoke |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 4.5 and 5 on 5 |
| Bolt pattern (second) | 5 on 4.5/114.3 |
| Offset | 0 |
| Center bore | 78 |
| Backspacing | 5 |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
Universal fit means the wheel is not built for one vehicle. Match the 5 on 4.5 or 5 on 5 pattern to your hub, confirm the center bore of 78 is suitable for your hub, and then check clearance against brake and suspension parts using the 0 offset and 5 backspacing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 0 offset places the mounting face at the centerline of the wheel, which changes clearance to fenders and calipers compared with positive or negative offsets. Check those clearances before the wheel goes on, and use lug nuts that seat correctly in this wheel.
What’s included
The package is the wheel itself, so lug nuts and other hardware are sourced separately. Not included: Lug nuts and valve stems are sourced separately from this wheel.









