Overview
The Raceline Wheels Shift 20×12 is a 20-inch satin black aluminum wheel, 12 inches wide, with part number RLW930B-21280-44. It has an 8 on 6.5 bolt pattern, an offset of -44 and a backspacing of 4.75, and it is Universal Fit.
Raceline builds this wheel line for performance, with roots in off-road racing. The Shift style gives the wheel its look. A wheel this wide with negative offset needs fitment checks before it is mounted.
Key features
- 20 inch diameter and 12 inch width
- Satin black finish on aluminum
- 8 on 6.5 bolt pattern
- Offset of -44 and backspacing of 4.75
- Shift style from Raceline Wheels
- Universal Fit, so hub and clearance decide the match
Fitting a wide wheel safely
A wide wheel with negative offset changes more than the look. It shifts the tire outward, which can change steering feel, tire wear and the load on wheel bearings. Scrub radius increases, so the steering may feel heavier or pull more on uneven roads. Many drivers find that a tire with a lower sidewall makes the ride firmer and more sensitive to road irregularities.
Before mounting, check the wheel against the vehicle’s bolt pattern and hub bore, then test-fit with the tire you plan to run. Look at the inner fender, the brake caliper and the tie rod while turning lock to lock. Fender trimming or spacers may be needed on some vehicles, and a rubbing tire can damage sidewalls or suspension parts over time. Re-check the lug torque after the first few drives, and inspect the inside lip of the wheel for scrapes after rough trails.
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW930B-21280-44 |
| Style | Shift |
| Finish | Satin Black |
| Construction | Aluminum |
| Wheel diameter | 20 inches |
| Wheel width | 12 inches |
| Offset | -44 |
| Backspacing | 4.75 |
| Bolt pattern | 8 on 6.5 |
Vehicle fitment
Universal Fit means the wheel has no named vehicle, so the match is yours to verify. The 12 inch width and -44 offset push the tire outward, so check fender, brake and suspension clearance on the vehicle before mounting.
Vehicles cannot be named for this wheel, so match the 8 on 6.5 bolt pattern and offset to the hub you are replacing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Backspacing of 4.75 leaves measured room behind the mounting face for calipers and suspension parts. A negative offset of -44 moves the mounting face outboard of the centerline and can reach fender lips. Test-fit with the chosen tire and confirm steering clearance before final use.
What’s included
Valve stems, center caps and lug hardware are not confirmed for this wheel. Check the package contents against your installation before starting.
Not included: tires.









