Overview
The Raceline Wheels Monster RLW928M-79055-12 is a 17 x 9-inch aluminum windowed spoke wheel with a black and machined finish, set up for a 5 on 5.5 bolt pattern. It sits in Raceline’s 928 Monster series.
The 108 center bore is the hub hole the wheel centers on, and the -12 offset places the mounting face outboard. Backspacing is 4.5, which is the depth from the mounting face to the inner edge of the wheel.
The finish pairs black with machined areas, so the bright cut surfaces contrast with the darker finish.
Key features
- 17-inch diameter and 9-inch width
- 5 on 5.5 bolt pattern
- Windowed spoke design with a black and machined finish
- Aluminum construction
- Part of the 928 Monster series
- 108 center bore, -12 offset and 4.5 backspacing
Choosing lug hardware
Lug hardware is the link between the wheel and the hub, so it deserves attention before any tire goes on. Seat styles vary, and a conical, ball or flat seat only holds properly when the nut matches the wheel’s seat. Mixing seat types is a common cause of loose wheels, even when the stud count is right. Lug nuts are often replaced along with the wheel because old ones may have worn seats or stretched studs.
Before mounting, check each stud for thread damage and clean any rust or debris from the hub face. A wheel that sits flush against the hub is easier to keep tight on the trail. Re-check the torque after the first short drive, since new seats can settle slightly.
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW928M-79055-12 |
| Series | 928 Monster |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 4.5 |
| Style | Windowed |
| Finish | Black/Machined |
| Construction | Aluminum |
Vehicle fitment
Universal Fit is the label on this wheel, and no vehicle is named. The 5 on 5.5 pattern and 108 center bore must suit the hub, and the -12 offset needs its clearance checked against the brakes and fenders.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the lug nuts to the wheel’s seat style before mounting. Confirm the 5 on 5.5 pattern against the hub, since the stud count and bolt circle must both match.
What’s included
Check the package contents against your installation before starting.









