Overview
The Raceline Wheels Clutch RLW934G-79065-12 is a 17 x 9-inch aluminum spoke wheel in satin gunmetal, set up for a 6 on 135 bolt pattern. It sits in Raceline’s 934 Clutch series, which the brand presents as the consumer version of the wheels it builds for off-road racing.
Offset is the distance from the wheel’s mounting face to its centerline. This wheel has a -12 offset, which places the mounting face toward the outer side and leaves the wheel sitting further outboard than a zero-offset wheel of the same width. The 87 center bore centers the wheel on the hub, and the listed backspacing is 4.5.
For a 9-inch-wide wheel, offset and backspacing together decide how much room the wheel needs behind its mounting face, so they are the first numbers to compare with a vehicle’s clearances.
Key features
- 17-inch diameter and 9-inch width
- 6 on 135 bolt pattern
- Spoke design with a satin gunmetal finish
- Aluminum construction
- Part of the 934 Clutch series
- -12 offset, 87 center bore and 4.5 backspacing
Offset and clearance basics
Offset is the distance from the mounting face to the wheel’s centerline, and it decides how far the tire sits from the hub. A negative offset pushes the wheel outward, which can help tire clearance on some builds and hurt it on others. Backspacing works with offset to set the depth behind the mounting face, so both belong on the same checklist before any purchase.
Gunmetal finishes hide light scuffs but still collect brake dust around the spokes. Rinse the face regularly and inspect the bead seat when the tire is mounted, since a clean seat helps the tire hold air.
- Compare offset with brake caliper clearance
- Check fender and suspension room at full lock
- Clean around spokes to limit brake dust build-up
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW934G-79065-12 |
| Series | 934 Clutch |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | -12 |
| Backspacing | 4.5 |
| Style | Spoke |
| Finish | Satin Gunmetal |
| Construction | Aluminum |
Vehicle fitment
The Universal Fit label is a design tag, not a vehicle match. The 6 on 135 pattern, 87 center bore and -12 offset must suit the hub, and no vehicle is tied to these figures.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lug seat style, then match the fastener to the wheel before mounting. Check the 6 on 135 pattern and the 87 center bore against the hub, since a mismatched center bore can keep the wheel from centering. Mounting errors can lead to wheel failure while driving.
What’s included
Check the package contents against your installation before starting.









