Overview
The Raceline Wheels Renegade 8 16×8 is a 16-inch spoke wheel, 8 inches wide, with part number RLW888-68081. It is aluminum with a polished finish and an 8 on 170 bolt pattern, and it is a universal fit wheel rather than one built for a named vehicle.
Raceline says its wheel designs draw on the company’s off-road racing background, and the 888 Renegade 8 series carries that engineering into a consumer spoke wheel. With no year, make or model attached, the bolt pattern, center bore, offset and backspacing decide whether the wheel mounts on a given hub. Raceline gives no load rating, weight or recommended tire size for this wheel, so those points need checking separately.
Key features
- 16 inch diameter and 8 inch width
- Polished finish on an aluminum spoke face
- 8 on 170 bolt pattern with a center bore of 131
- Offset of 0 and backspacing of 4.5
- Part of the 888 Renegade 8 series from Raceline Wheels
- Universal Fit, so the hub measurements decide the match
Before you mount
Backspacing and offset together decide how much room the wheel leaves behind the mounting face. On a 16 inch wheel the spokes sit close to the brake caliper, so a caliper check is worth doing with the actual tire fitted. Hub-centric rings, lug nut seat type and tire size all affect the final fit, and they are often replaced together when a wheel is changed.
Polished aluminum shows water spots and brake dust more clearly than coated finishes. Clean the wheel after drives with a pH-neutral cleaner, then inspect the spokes and the lug holes for cracks. Keep a torque wrench on hand and recheck the lug nuts after the first few drives.
- Check caliper clearance with the tire mounted
- Plan hub-centric rings if the bore differs from the hub
- Recheck lug torque after the first few drives
- Inspect spokes and lug holes after rough use
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW888-68081 |
| Series | 888 Renegade 8 |
| Style | Spoke |
| Finish | Polished |
| Construction | Aluminum |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Offset | 0 |
| Backspacing | 4.5 |
| Center bore | 131 |
| Bolt pattern | 8 on 170 |
Vehicle fitment
Universal Fit applies here, meaning no specific year, make or model is attached to this wheel. Check that the 8 on 170 bolt pattern, center bore of 131, offset of 0 and backspacing of 4.5 match your hub, and that the wheel clears your brakes and suspension.
No year, make or model is attached to this wheel. Check that the 8 on 170 bolt pattern, center bore of 131, offset of 0 and backspacing of 4.5 match your hub, and confirm the wheel clears your brakes and suspension. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub bore and bolt pattern before ordering, since a center bore of 131 may need hub-centric rings to center the wheel. Backspacing is the distance from the mounting face to the inner edge of the wheel, so 4.5 shows how much room sits behind the mount for calipers and suspension parts. Offset of 0 puts the mounting face on the wheel’s centerline. Test-fit with the tire you plan to run and check clearance at full steering lock.
What’s included
The wheel is supplied alone. Valve stems, center caps and lug hardware are not included, and tires are not part of this product.
Not included: tires, plus any hub-centric rings or lug hardware your hub needs.









