Overview
The BH00173 is a stainless steel braided front and rear brake hose kit for the 1993-2001 Jeep Cherokee (XJ). It covers the Base, Classic, Country, Limited, SE and Sport trims.
The kit is designed as a replacement for the original rubber brake hoses, with a braided construction intended for a firmer pedal feel. The hoses use premium PTFE with permanently crimped-on zinc plated steel fittings, a stainless steel braid and a red PVC outer cover that resists abrasion and corrosion.
The kit is DOT FMVSS106 certified, and the hoses have passed expansion and burst strength, whip resistance, water absorption and tensile strength tests. Mounting brackets and hardware are included.
Key features
- Front and rear stainless steel braided brake hose kit
- Performance replacement for original rubber brake hoses
- Premium PTFE hose material
- Permanently crimped-on zinc plated steel fittings
- Stainless steel braid with red PVC outer cover
- DOT FMVSS106 certified.
- Mounting brackets and hardware included
Braided lines and pedal feel
Braided stainless steel hoses are built to resist expansion under pressure, which is why they are often chosen as a replacement for older rubber hoses. Rubber hoses can swell as they age, so some drivers notice a softer pedal feel. A braided hose keeps its shape more consistently, though the pedal still depends on the rest of the system being in good order.
Because hoses flex with suspension travel, routing matters. Keep them clear of exhaust heat, sharp edges and the tire path, and check that they do not rub against the frame or springs. Look over the red outer cover for chafing, and inspect the crimped fittings for seeping fluid. A hose that shows wear should be replaced rather than patched.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | BH00173 |
| Product type | Stainless steel braided brake hose kit |
| Position | Front and rear |
| Hose material | Premium PTFE |
| Braid | Stainless steel |
| Outer cover | Red PVC |
| Fittings | Zinc plated steel, permanently crimped on |
| Certification | DOT FMVSS106 |
| Fit type | Direct fit |
| Vehicle | 1993-2001 Jeep Cherokee (XJ) |
Vehicle fitment
The kit fits the 1993-2001 Jeep Cherokee (XJ) in Base, Classic, Country, Limited, SE and Sport trims, as a front and rear direct fit kit.
The kit fits the Cherokee (XJ) from 1993 to 2001 only; other Jeep models are outside its fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Brake components are safety-critical, so professional installation is strongly recommended. Support the vehicle on rated jack stands on level ground and never work under a vehicle held only by a jack.
- Tighten all fittings and fasteners firmly and check for leaks before driving.
- Bleed the brake system and confirm a firm pedal before driving.
- Re-check fittings after the first few miles of driving, and bed in new pads and rotors gradually.
What’s included
- Front and rear stainless steel braided brake hoses
- Mounting brackets and hardware












