Overview
The Crown Automotive 52008675 is a front rubber brake hose that runs from the frame to the caliper on the driver side. It fits the 1990–2001 Jeep Cherokee (XJ), 1993–1998 Grand Cherokee (ZJ), 2004–2006 Wrangler (LJ) and 1997–2006 Wrangler (TJ).
Key features
- Front rubber hose to the caliper
- Front left (driver side) position
- Stock length
- Size class 0 inches to 2 inches
- Fits XJ, ZJ, LJ and TJ models
Driver side hose maintenance
The driver side front hose carries fluid to the left caliper, where it sees constant heat from the brake rotor and road debris kicked up by the front tire. Because the left side often sits closer to the curb and mud, its cover can collect grit that wears the outer layer over time.
Routine checks are simple. Run a hand along the hose while the wheel is turned to find stiff, swollen or rubbed spots. Look at the crimped fittings for seepage, and check that the hose is not twisted at either end. A hose that bulges when the brake is pressed should be replaced at once.
If the hose is replaced, pair the work with a fluid change, since the system is opened during removal. Keep the banjo washers clean and replace them when the fitting is disconnected, then bleed the brakes in the correct sequence and test the pedal before normal driving.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52008675 |
| UPC | 848399014136 |
| Position | Front left (driver side) |
| Type | Rubber |
| Function | Front rubber hose to caliper |
| Length | Stock |
| Size | 0 inches to 2 inches |
| Fit | Direct fit |
Vehicle fitment
This hose is a direct fit for the 1990–2001 Jeep Cherokee (XJ), 1993–1998 Grand Cherokee (ZJ), 2004–2006 Wrangler (LJ) and 1997–2006 Wrangler (TJ).
The passenger side uses part number 52008674. The JK Wrangler is not covered. Check your vehicle’s year, model and trim against the fit before buying.














