Overview
The Skyjacker FBL47 (part number SKYFBL47) is a pair of stainless steel braided front brake lines for the 1987-1995 Jeep Wrangler YJ, made for a lift of 3.5 to 6 inches.
Longer braided hoses with brass fittings are made for lifted YJ front axles. They carry an extruded polyurethane coating and are DOT certified and European T.U.V. approved.
Key features
- Direct-fit front hoses for the Wrangler YJ
- Stainless steel braided hose
- Heavy-duty off-road brass fitting
- Extruded polyurethane outer coating
- DOT certified and European T.U.V. approved
- Limited lifetime warranty
Stock hoses on a lifted YJ
A lifted Wrangler YJ moves the front axle further through its travel, and at full droop the stock brake hoses can be pulled tight. Longer braided lines reduce that stretch and resist swelling under braking, which keeps the pedal firm. Because the YJ front end uses a solid axle, hose routing is also tied to axle articulation, so the lines should clear the spring and track bar.
Inspect the old hoses for cracking before removal, and check the hard line fittings where they meet the hoses, since corrosion is common on older trucks. When installing new hoses, check clearance at full steer and full droop. Plan to bleed the system and test the brakes in a parking lot before any trail use.
- Check clearance against the track bar and spring
- Inspect hard lines for rust near the fittings
- Bleed the system after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYFBL47 |
| Product type | Stainless steel braided brake hose |
| Hose material | Stainless steel |
| Fitting | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Position | Front |
| Lift height | 3.5 to 6 inches |
| Quantity | Pair |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1987-1995 Jeep Wrangler (YJ) across its trim levels.
The TJ, LJ and JK Wranglers are different generations and are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.









