Overview
The POR-15 Metal Prep 40204 is a 1 quart surface preparation product for metal. It is designed to help POR-15 Rust Preventive Coating and other coatings bond to bare metal. The product is not vehicle-specific, so it applies to metal parts on any vehicle or project.
The product etches the metal to create an anchor pattern and leaves a zinc phosphate coating for chemical bonding of paint and steel. It is designed to bond to aluminum and shiny polished metal as well as other metals. It is not caustic, corrosive, toxic or flammable.
Key features
- Gently etches metal to create an anchor pattern
- Neutralizes rust on the surface
- Leaves a zinc phosphate coating for chemical bonding
- Suitable for aluminum and shiny polished metal, per the maker
- Not caustic, corrosive, toxic or flammable
Preparing metal before coating
Surface prep is what decides whether a coating stays down. Bare metal that has been etched and neutralized gives a coating something to grip, while oil, dust or moisture left on the surface can keep the coating from bonding. Work from a clean, dry surface and handle it only with clean gloves afterward.
Plan the sequence so the prepared metal is not left exposed for long. Dust and humidity can settle on freshly etched metal, so coat the surface while it is still clean. If you have to stop partway through a panel, cover the area and clean it again before continuing.
- Degrease before and after any rust removal
- Work in clean, dry conditions
- Handle prepped metal with clean gloves
- Coat the surface soon after the prep dries
Specifications
| Brand | POR-15 |
|---|---|
| UPC | 20051491402044 |
| Size | 1 Quart |
| Compatible coating | POR-15 Rust Preventive Coating and other coatings |
| Surface treatment | Etches metal, neutralizes rust, leaves zinc phosphate coating |
Vehicle fitment
Fitment is not vehicle-specific. This is a surface preparation product for metal, so check the coating and the metal you are working on rather than a vehicle year and model.
Installation notes
Degrease the work piece thoroughly before use. Then apply the Metal Prep to neutralize any rust and etch clean bare metal, which allows better adhesion of the coating you apply afterward.
What’s included
The product is one 1 Quart container of Metal Prep.
Not included: POR-15 Rust Preventive Coating or any other coating, applied after the prep.









