Overview
The POR-15 OEM Bedliner in Black, part number 49701, is a water-based, rubberized coating made for protecting truck beds. It can be brushed, rolled or sprayed onto correctly prepared surfaces and fits no particular vehicle, as it is Universal Fit.
The coating also suits other metal, aluminum, fiberglass and wood surfaces that face impact and scuffing. It is a DIY system with a textured semi-gloss black finish and offers adhesion, impact resistance and flexibility suited to busy work surfaces.
Key features
- Water-based rubberized formula
- Brush, roll or spray application
- Textured semi-gloss black finish
- It is UV stable and resists the damage typically caused by UV exposure.
- Low odor, with cleanup using soap and water
- No limiting pot life, so unused product can be resealed for later touch-up
- Built with POR-15 rust preventive technologies
Choosing a bed liner finish
A bed liner takes the abrasion of cargo, tools and gear sliding across it, so the film has to stay bonded when it is scuffed. Textured finishes hide wear and grip loads better than smooth paint, and a semi-gloss black keeps glare low. Where the bed meets the tailgate and wheel wells, the coating sees the most flex, so the edges and seams deserve close attention during prep and recoat.
Surface type affects results more than the brand of coating. Clean grease from the floor, scuff the metal evenly, and check that fiberglass or wood is sealed and dry before you apply anything. Plan for a few coats and let each one cure before the next. Keep sample pieces to test on before doing a full bed, especially if the old finish was a spray-on liner or a different coating.
Specifications
| Brand | POR-15 |
|---|---|
| Part number | 49701 |
| UPC | 20051491497019 |
| Color | Black |
| Finish | Textured semi-gloss |
| Base | Water-based, rubberized |
| Surface preparation | Cleaning and abrasion with 80 – 120 grit sandpaper |
| Application | Brush, roll or spray |
| Pot life | No limiting pot life |
| Cleanup | Soap and water |
Vehicle fitment
It is a coating rather than a part sized for a vehicle, so it is not matched to any model year or chassis.
It is intended for truck beds and also covers other metal, aluminum, fiberglass and wood surfaces. Confirm the surface type before you prepare it.
Installation notes
Prepare the surface first by cleaning it and abrading it with 80 – 120 grit sandpaper. POR-15 says applying the bedliner over POR-15 Rust Preventive Coating gives maximum protection. Any unused product can be resealed in its container, and cleanup uses soap and water.
What’s included
The coating and part number 49701 are included. Confirm the container size fits your project before ordering.









