Overview
The Omix-ADA 17740.02 is a gas filler hose for the 1976–1977 Jeep CJ5 and CJ7. It is made for the 1976 CJ, so confirm the 1977 model against an original hose before buying.
The hose measures 2-5/8 inch outside diameter and 2-3/16 inch inside diameter. It has a vent hose fitting adapter, which has a specific orientation when mounted.
Key features
- Gas filler hose with a vent hose fitting adapter
- 2-5/8 inch outside diameter
- 2-3/16 inch inside diameter
- Fits CJ5 and CJ7 in Base, Golden Eagle and Renegade trims
Checking fit on older CJ models
Early CJ filler hoses differ in length, bend angle and end fittings from year to year, even when the outside size looks the same. Lay your original hose beside the new one and compare the bends, the neck connection and the tank end. Small differences in routing can cause kinks, which restrict flow and stress the joint over time.
Mounting orientation also matters when the hose has a vent adapter. Set the adapter the way the old hose was set, so the vent line runs without tension. Tighten clamps evenly and check for fuel smell after the first fill-up.
- Compare bends and end fittings with the original
- Watch for kinks along the route
- Confirm the vent adapter direction before tightening
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17740.02 |
| UPC | 804314034450 |
| Outside diameter | 2-5/8 inch |
| Inside diameter | 2-3/16 inch |
| Vent fitting | Adapter faces the outside of the hose when mounted |
Vehicle fitment
It fits the 1976–1977 Jeep CJ5 and 1976–1977 Jeep CJ7, both in Base, Golden Eagle and Renegade trims.
Because Omix-ADA’s description says 1976 CJ only, confirm the 1977 model against an original hose. The list does not include 1975 or earlier CJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
When mounting, orient the vent hose fitting adapter so it faces the outside of the hose.
What’s included
The package is one gas filler hose. Confirm whether clamps are needed before installing.
