Overview
The Omix-ADA gas tank filler hose, part number 17740.03, is a replacement filler hose with a 1 inch inside diameter and a 1-3/8 inch outside diameter. Omix-ADA builds it to original specifications as a direct replacement for Jeep parts.
Omix-ADA backs this filler hose with a limited five year warranty. Confirm fit for your vehicle’s year, model and trim before ordering, and compare the hose diameters with your original filler hose before use.
Key features
- Built to original Jeep specifications as a direct replacement
- 1 inch inside diameter
- 1-3/8 inch outside diameter
- Limited five year warranty
Signs the filler hose needs replacing
The filler hose carries fuel from the filler neck to the tank, so it is exposed to fuel vapor, heat and road debris. Over time the rubber can harden, crack or swell, and a worn hose may leak or let vapor escape around the connection.
Inspect the hose and its clamps at regular service intervals, especially after work near the rear of the vehicle. Replace worn grommets, seals and clamps at the same time, since a new hose will not seal well on a worn fitting.
- Visible cracks or soft spots
- Fuel odor near the filler neck
- Loose or corroded clamps
- Damp areas around the connection
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17740.03 |
| UPC | 804314035464 |
| Inside diameter | 1 inch |
| Outside diameter | 1-3/8 inch |
| Warranty | Limited five year warranty from Omix-ADA |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the hose diameters with your original filler hose before installing.
Since no vehicles are named, compare the hose diameters with your original filler hose before use.
Confirm your vehicle’s year, model and trim before ordering.
