Overview
The Icon Suspension 22012 is a 2.5 inch Stage 2 suspension system with a lower front link kit for the Jeep Wrangler JL, two-door and four-door models. It is built to increase wheel travel and ride quality on and off road, and it allows 35 inch tires.
The system is designed around the Wrangler JL’s Rubicon and non-Rubicon axle widths, and Icon offers wheels in 4.5 and 4.75 inch backspace to suit both.
Key features
- 2.5 inch lift height
- It gives 3 inches more front and 2 inches more rear wheel travel than stock.
- Lower front link kit included
- Dual rate coil springs with a lifetime guarantee against sagging and breakage
- 2.0 Aluminum Series shocks with vehicle specific valving
- 100 percent bolt-on installation
- Icon 1K testing: Icon reports over a thousand miles of off-road testing on the JL
Living with a lift
Raising a Wrangler changes the angles of the driveshafts and steering components, so the driveline should be checked after installation. Look for vibration at highway speed, which can point to an angle that needs correction. Alignment should be set once the lift is in place and the tires are mounted.
More wheel travel means the shocks, springs and links work through a longer range, which puts extra load on bushings and joints. Inspect the links and their ends at each oil change and after hard trail use, and look for play, cracked boots or leaking shock bodies.
Tire size is the other factor to plan around. A taller tire changes gearing and can rub at full compression, so think about the bump stop spacer and tire choice together before the install day.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 22012 |
| UPC | 700008541881 |
| Lift height | 2.5 inches |
| Front wheel travel gain | 3 inches over stock |
| Rear wheel travel gain | 2 inches over stock |
| Tire size | 35 inch; 37 inch with bump stop spacer kit |
| Shocks | 2.0 Aluminum Series, vehicle specific valving |
| Springs | Dual rate coil springs |
| Installation | Bolt-on |
The lower front link kit is part of the Stage 2 package and is the main difference from the Stage 1 system at the same 2.5 inch lift height. The system was developed through the ICON 1K testing program, which logged over a thousand miles of dirt driving on the JL.
Vehicle fitment
It is made for the Jeep Wrangler JL, 2018-2026 model years, in two-door and four-door models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit is bolt-on, no drilling or welding is described. Alignment is needed after any lift of this size, and the driveline angles should be checked after installation.
What’s included
It includes the 2.5 inch suspension system and a lower front link kit. A bump stop spacer kit for 37 inch tires will also be offered.








