Overview
The Rubicon Express JL7100E is a 2.5-inch Super-Ride lift kit for the 2018-current Jeep Wrangler JL 4-door. It uses 1.75-inch diameter 4130 chromoly Super-Ride front lower arms, coil springs tuned for bump compliance and load handling, and extended sway bar end links and bump stops for off-road use. The kit includes shock extensions for the shocks.
The system is built to clear 35-inch tires on a loaded non-Rubicon model and 37-inch tires on Rubicon models. Its lift range runs from 2.5 to 3.5 inches. It is tied to the 2018-2026 Jeep Wrangler JL. Shock extensions are included, but shocks are not part of the kit, so plan the shock setup for the new height.
Key features
- 2.5-inch lift height
- 1.75-inch diameter 4130 chromoly Super-Ride front lower arms
- Coil springs with rates tuned for bump compliance and load handling
- Extended sway bar end links
- Extended bump stops
- Shock extensions included
Shocks and suspension travel
A taller ride height asks more of the shocks, because they must cover more travel on both rebound and compression. Shock extensions can keep an existing shock working at the new height, but they do not change how the shock damps. Check the shock length at full droop and full compression to decide whether new shocks are needed.
Super-Ride short arms and extended bump stops work together to control the axle on rough ground. Front suspension geometry changes with the new arms, so tire wear and steering feel should be watched after the first drives. Keeping the sway bar links and bump stops in good condition helps the front end stay controlled.
- Measure shock length at full droop and full compression
- Check the bump stops for cracks after hard impacts
- Re-check toe after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7100E |
| UPC | 700008594491 |
| Suspension type | Super-Ride short arm |
| Lift height | 2.5 inches |
| Front lower arms | 1.75-inch diameter 4130 chromoly |
| Spring type | Coil spring kit |
| Shocks | Shock extensions included; shocks not included per the fitment chart |
Vehicle fitment
It covers 2018-current Wrangler JL 4-door models, which places it on the 2018-2026 Jeep Wrangler (JL).
Verify the year, model and trim against your vehicle before buying, including whether your Wrangler is a 4-door model.
Installation notes
The Super-Ride front lower arms and the extended sway bar links change the front suspension geometry, so the alignment should be checked after the install.
What’s included
The kit includes the Super-Ride front lower arms, the coil springs, the extended sway bar end links, the extended bump stops and shock extensions. Shocks are not included.













