Overview
The Fabtech K1050M is a 3.5-inch spindle lift with Stealth monotube shocks. It fits the 2007–2013 Chevrolet Silverado 1500 and the 2007–2013 GMC Sierra 1500. The spindles are direct replacements for the factory part and keep the stock ball joints in use.
The lift increases vehicle height and adds front ground clearance while keeping a ride close to stock. It has clearance for 33-inch tires. The rear is lifted with a 1-inch block and U-bolt kit. Recommended tires are 285/70R17 on 17×8, 325/60R18 on 18×9 and 325/50R20 on 20×9 wheels, each with 5-inch backspacing and minor trimming. Expect some loss of turning radius.
Key features
- 3.5-inch lift height, range 2.5 to 3.5 inches
- Direct-replacement spindles
- Stock ball joints retained
- 1-inch rear block and U-bolt kit
- Stealth monotube shocks and rear Stealth shocks
- Clearance for 33-inch tires
Steering and driveline notes
Any spindle lift changes the geometry at the front wheels, so steering feel and tire wear shift after installation. Taller spindles move the tire further from the hub and can change the scrub radius, which is why a loss of turning radius is common with large tires. A front-end alignment is needed once the kit is in, and the caster should be checked as well.
Lifting the rear with blocks and U-bolts changes pinion angle, so the driveshaft angles should be inspected. Worn or stiff ball joints, tie rod ends and steering stabilizer parts are often replaced together with a lift because they carry more load at the new height. Look for play at the wheels, uneven tread wear and clicks over bumps as signs the front end needs attention.
Recheck the lug nuts and all fasteners after the first few drives, since new components settle under load. Keep spare tire clearance in mind when turning at full lock, because contact with the fender can happen with larger tires.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | K1050M |
| UPC | 700007232801 |
| Lift height | 3.5 inches (range 2.5 to 3.5 inches) |
| Suspension type | Knuckle, spindle |
| Rear lift method | 1-inch lift block and U-bolts |
| Tire and wheel fit | 285/70R17 on 17×8, 325/60R18 on 18×9, 325/50R20 on 20×9; 5-inch backspacing |
| Shocks | Stealth monotube shocks; rear Stealth shocks |
| Tire clearance | Clearance is for 33-inch tires. |
Vehicle fitment
It fits the 2007–2013 Chevrolet Silverado 1500 and the 2007–2013 GMC Sierra 1500.
The list covers the 1500 trucks in those years only, so the 2500 HD and 3500 HD models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The spindles bolt in as direct replacements, and the stock ball joints remain in use. The kit causes some loss of turning radius.
What’s included
Front spindles, a 1-inch rear block and U-bolt kit, and Stealth monotube shocks plus rear Stealth shocks.









