Overview
The G2 Axle and Gear 25-2062 is a minor ring and pinion install kit for a 9-inch Toyota IFS axle. IFS stands for independent front suspension.
No model years are given, so the Toyota application needs to be confirmed against your vehicle.
Independent front axle service
Independent front axles place the gear set in a tight housing with steering and drive components nearby, so access is limited and alignment of the pinion angle matters. Plan extra time for removing the housing and cleaning the mating surfaces before assembling the gears.
During a gear install, the front differential bearings, pinion seal and axle shaft seals are commonly replaced together. Inspect the constant velocity joints and axle boots while the front end is apart, since worn boots can allow contamination into the joints. Verify the carrier backlash and tooth contact before final assembly, and use gear oil that is suited to the axle. Keep the old ring gear and pinion for comparison if the new set needs adjustment, and record every shim change so setup can be repeated. Tighten the ring gear bolts evenly in a crisscross pattern.
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2062 |
| UPC | 631410129243 |
| Axle size | 9-inch |
| Suspension | IFS (independent front suspension) |
Vehicle fitment
Fit depends on the 9-inch IFS axle size. Check the axle and your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear setup on this kit needs precise pinion depth and backlash work, so a shop comfortable with independent front axles is the right choice.
What’s included
Items in the box are a pinion nut, pinion seal, crush sleeve, pinion shims, carrier shims, ring gear bolts, thread locking compound, gear marking compound and silicone sealer.
Not included: The ring and pinion gear set is sold separately and is not part of this kit.








