Overview
The G2 Axle and Gear 25-2021 is a minor ring and pinion installation kit for the GM 10 Bolt 8.5 Inches rear axle.
For a GM 10 bolt 8.5 inch rear axle that only needs new gears, the 25-2021 is the lighter-weight option. G2 packs the shims, nut, crush sleeve, seal, bolts, silicone, Loctite and marking compound, and skips the bearings.
An 8.5 inch GM rear axle that has sound bearings does not need a full master kit. G2’s 25-2021 therefore concentrates on the consumables and the adjustment parts: shims for pinion depth, a new crush sleeve and nut, a pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound. Choosing the minor kit avoids paying for bearings that are not being replaced.
Key features
- Minor kit for the GM 10 Bolt 8.5 Inches axle (rear)
- Meant for jobs that keep the existing bearings
- Shim kit for setting pinion depth and carrier position
- Pinion nut, crush sleeve and pinion seal
- Ring gear bolts and silicone sealer
- Loctite and gear marking compound
Checking the carrier before reuse
Reusing bearings is reasonable when the carrier feels solid and the races show no pitting, scoring or heat marks. Turn the bearings by hand and feel for roughness, then check the carrier for play while the pinion is out. Any sign of damage points toward a master kit rather than a minor one, because the faulty part would need replacing anyway.
Shim adjustment is done in small steps, so mark each shim pack and measure the change before reinstalling. Keep the marking compound thin and even so the pattern reads clearly. Once the pattern is right, tighten the bolts to the recommended torque and recheck the pattern to confirm nothing shifted.
- Feel for roughness when turning the bearings
- Measure each shim change before reinstalling
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2021 |
| UPC | 631410094923 |
| Kit type | Minor kit |
| Axle location | Rear |
| Axle type | GM 10 Bolt 8.5 Inches |
| Axle manufacturer | GM |
| Manufacturer part number | G/225-2021 |
Vehicle fitment
It is the rear version for the GM 10 bolt 8.5 inch axle. The front-axle version is 25-2021F. Make sure the axle type and year match before ordering.
Confirm your vehicle’s axle type and year before ordering.
Installation notes
With the existing bearings reused, check the carrier for play and the races for pitting. Use the supplied shims to get the pinion depth right and check the pattern.
Before starting the 25-2021 job on the GM 10 Bolt 8.5 Inches axle, gather a dial indicator, a torque wrench and clean gear oil. Note the old pattern on the teeth, because the shims in the 25-2021 are the means of correcting the new one. The old nut and seal are replaced. Keep races paired with bearings.
What’s included
- Proper shim kit
- Pinion nut
- Crush sleeve
- Pinion seal
- Ring gear bolts
- Silicone sealer
- Loctite thread locker
- Gear marking compound
Not included: bearings and gears; the 25-2021 is a minor kit for the GM 10 Bolt 8.5 Inches axle.









